Adam Blair-Smith
Adam Blair-Smith
> a) Seems like you did verification a wong way. -To verify calibrated display against it's own profile, _like a general purpose monitor plugged through a common GPU_, please check...
@VgerTest > "Uncalibrated.pdf" is actually a "profiled.pdf" and report shows that custom made profile describes display behavior accurately. I tricked DisplayCAL into thinking there was a profile applied when there...
> NOT WHITE LED for sure, but whitepoint error due to wrong colorimeter correction maybe low or high, it varies with each unit That's useful info, and perhaps the source...
> Try to measure conected through DisplayPort and in other factory OSD preset like Standard (sRGB may have issues) > DisplayCAL > tools > calibrated or uncalibrated screen report. It's...
@VgerTest Ok, so I did a new calibration with all your suggested changes and got worse results. Let me know if you see anything that looks misconfigured. Here's the verification...
> Just look at report header! It's all explained: what are you doing, what is ypur reference... I'm sure it is, but I lack the calibration knowledge to understand what...
@VgerTest I figured it out! But it's not what either of us thought... Basically, I assumed that the prompt to create a 3D-lut that pops up after calibration would use...
Ok, I'm going to close this and run a few more tests at some point to confirm this is what's happening. If I'm certain it's a bug, I'll make a...
@eoyilmaz and @secayedxistence , I have had numerous issues with setting up 3D LUT creation for resolve, as the preset and the methods that worked prior to python3 no longer...
> > the preset and the methods that worked prior to python3 no longer work > > If your workflow was working under Python 2 and not working in Python...