AberDino

Same symptoms here, and the workaround got Predbat back up and running again. Thanks!

Hi @springfall2008, I have read the documentation and have car charging planned with Predbat with my GivEnergy EV charger (as per subject title and the link to the discussion I...

Just to confirm that when I disable the "Dynamic Load Adjust" option (**switch.predbat_metric_dynamic_load_adjust**) the 'hold for car' functionality works fine, so the question is why that option does not see...

Thanks @gcoan. I did see that, but I have **switch.predbat_car_charging_hold** set to false, so I didn't think that would matter. In any case, I have now commented out the **car_charging_energy**...

Hi @gcoan, unfortunately it did not make a difference, so I've now disabled the Dynamic Load Adjust option again. I'm not familiar with the Predbat code, but where _should_ it...

Same symptoms yesterday when I was still on 2024.11.2, so I don't think it is related to the upgrade to 2024.11.3.

Thanks for all the feedback. I've got "inverter_reserve_max" set to 98% in my apps.yaml file, so I will keep the "Enable AC Charge Upper % Limit" option enabled for now,...

Hi @mpartington, that's an interesting one, and leaves me with a bit of a dilemma. As you can see above, in my case, where Predbat's intention is to hold the...

@mpartington and @gcoan, the "Enable charge target" option is available for me with GivTCP v3.0.4 (AIO control), and I can confirm that when I toggle it, the "Enable AC Charge...

> enable AC charge upper limit% if SOC target disable AC charge upper limit% if SOC target =100% FYI, for the moment, I've implemented the above logic using HA automation,...