Aaron

On my site it does post the new post to the thread without reloading the page and I can see it. I just have no edit option until the page...

Thanks for this software, its a really nice idea and would make the cyclops really good. I also confirm this issue. In addition to whats been said above I also...

As a work around for this I have put a switch in. One way puts the OSD on the screen the other way runs the video straight from the receiver...

I have the same issue. Tried changing to timer 1, it complied and put data out over UART but didn't change value with my controller Then again I am a...

I have just ran into the same issue but dont seem to be able to resolve it with the above solution  It is a brand new unsoldered board but...

Yes to both

I tried this script and get the following message over serial port https://docs.arduino.cc/tutorials/nano-33-ble-rev2/imu-gyroscope/ Started Failed to initialize IMU! Output from the serial port with the headtracker code [serial boot.txt](https://github.com/user-attachments/files/16433836/serial.boot.txt) Broken...

A bit of further testing if I use Arduino_BMI270_BMM150 1.1.0 it gets a bit further but still does not enter if (IMU.gyroscopeAvailable()) { Im guessing better checks were introduced from...

  Which ic is the imu? There is a part near the xyz logo that looks chipped. At first I thought it was an inductor but looks like a...

I will try getting the picoscope on the i2c tommorow to see if it's doing anything. If not I will initiate the return to farnell as they actually sent the...