AKA comments

Results 9 comments of

AKA

Incorrect startup location when using dual monitors with different DPI scaling

This is still an issue for me

How to override default write to 0x1c13 on device init?

Thanks for the quick response! I have read the documentation for SdoError, but momentarily forgot that would be the best place to reference its returned value order when I wrote...

How to override default write to 0x1c13 on device init?

...just to add more info to this, I built the most recent version of SOEM (the superseding C library) and am able to [run ](https://github.com/OpenEtherCATsociety/SOEM/blob/master/test/linux/simple_test/simple_test.c) `linux/simpletest` just fine, which I...

How to override default write to 0x1c13 on device init?

Thanks for the reply - still no luck with pysoem==0.1.1, which is confusing given the success of ngblume's `separate_thread.py` script back in March 2020 or so. Next up I will...

How to override default write to 0x1c13 on device init?

Just an update, I realized that the "subindex does not exist" error isn't a show-stopper for me, since I'm only writing analog output values. So to get around this, rather...

How to override default write to 0x1c13 on device init?

Thank you! I will try this in the next few days and report back here.

Strange import error within _LeapPython.so

I'm also on 2.7.3. I'll update here if I ever figure it out...

Is it possible to inject custom information from the FC into OSD?

I'm interested in this too - specifically, I have Lua scripts that send custom MAVLink1 STATUSTEXT (id 253) messages that I'd like to show up onscreen in a manner similar...

Is it possible to inject custom information from the FC into OSD?

Hi, I actually got this working just fine without needing to alter the scarab-osd firmware - my issue was most likely just due to an upstream issue sending mavlink statustext...