AAKFISHERMAN

Hi. In that sketch i'm using ethernet w5500 shiled also sdcard and ds3231 rtc. Transceivers SN65HVD230 are shields CV230. I had tested with 3 different pieces, without success. In fact,...

Hi, I did some wiring modifications on my canbus network (shielded cables) and now i´m receiving several different frames on DUE (only RX). But still not transmiting; None of arduinos...

Hi. Thanks for your help Collin. I did a trace with oscilloscope and found some inconsistences. Voltage on DUE CAN TX was very low.... like 0.282V... At DUE CAN RX...