5xPa

Good morning did you ever get a resolution, I have exactly the same problem, have shelly H&T. Bit it does not show as a sensor. I would like to trigger...

Would be grateful for any info you have on installing this plugin. I installed via Hoobs. If you have terminal command for installation I could try. I did try terminal...

I have just notice the same thing humidity icon next to temperature icon. If I click on the humidity icon brings up the temperature adjust page This only happens on...

Below is the information from my installation Manufacturer Serial Number Default-SerialNumber Model Firmware HomeKit Certified Honeywell HeatingZone 086 Sent from my iPhone > On 20 Aug 2022, at 15:32, Lucas...

I have been running IOS 16.02 without any problem. Normally Apple TV 4K is the active hub. After some work HomePod (stero pair mini) started to have problem where a...

I read above that Lostformars had the same issue but in reverse.. He had to force the Homekit Hub onto Homepod minis. Where as I had to force the the...

I use HOOBs being new to Homebridge. I'm trying to run as described, I have an automation set to switch of the timer if motion sensor has stopped detecting motion...

Hi I found the latest version with resettable on switch. Works great with motion sensor. I also changed to HomeBridge on Windows 10. Thanks for the great plugin

If you switch off before the timer has expired and switch on at a later time. The time elapsed from the first operation remains. If you tick the box then...

Being new to Hoobs Homebridge and Linux. The sample installation config appears to be for serial link "platforms": [ { "platform": "Texecom", "serial_device": "/dev/ttyUSB0", "baud_rate": 19200, "zones": [ How would...