5ft24dave
5ft24dave
Has this been addressed in the recent 5.15.44 kernel?
The Pi POE hat is only rated 5V @ 2.5 amps. Not enough for the Pi4 and an SSD. I'm running the UCTRONICS POE hat and my Pi4 4g and...
my pi runs POE, and my network switch etc is on a 1000VA UPS. Running NUT on the pi as well for monitoring the UPS and it will gracefully shut...
I would be willing to help test as well. I have an APC Back-UPS Pro 1000, Model BX1000M and it also is missing the output voltage data. **_upsc C64ups@localhost battery.charge:...
db migrate is failing. did the backup as above, everything going smooth, estracts then bombs out I know the db name is correct as its what's in the config.py file...
Working perfect now! Data in my DB started June 4, 2022. Took 4 hours and 20 minutes! I'm running a 500GB m.2 drive in a USB3.1 carrier. Boots right up! ...
I can confirm that 0.2.0 works without issues under the V6.1.11 Kernel on the pi
Since RPI foundation removed old methods of GPIO access, a temporary work around is: `sudo rpi-update d86b5843d68b9972a5430a6d3da1b271cfc83521` this reverts back to Kernel 6.1.74, which still supports the older methods
Yes, it does. I have 2 Pi5's running the 6.1.74 kernel due to needing GPIO.
Pi updates just updated the kernel to 6.6.31, which kills GPIO again If you just did an update, you need to run this again: `sudo rpi-update d86b5843d68b9972a5430a6d3da1b271cfc83521`