rcmc

I have also tried sqm-scripts package with fq_codel and cake qdiscs, neither of which seemed to affect this issue one way or another.

Thanks @brada4 , I'll follow your suggestion to rule out any traffic management issues. Will report back here in a few days with results.

I just installed qBittorrent on my Windows laptop and started seeding the very same torrent (using SMBD) that was going at ~260kbps on transmission-daemon for the last several days. Same...

Tweaked some parameters in the fileshare and now I'm up to this:  So in just this one example I'm getting 16250 kBps, about 50 times the best...

I'm not an OpenWRT/Linux developer so I don't fully comprehend what you're suggesting. In any case here's the output of the commands you suggested: ``` root@OpenWRT:~# ethtool -k eth0 Features...

Sorry, but I'm going to have to ask you to please go into a bit more detail to explain what you mean by each of those 3 things you mentioned....

Okay two questions: (1) I've found the following features in ethtool that I think pertain to tx offloads. Can you please confirm if these are the correct, and the only...

Oh, I see now! Looks like your suggested changes could all be accomplished by just running the following commands! ethtool -K eth0 gso off ethtool -K eth0 tx off ethtool...

Looks like maybe pause frames are already disabled for transmit? ``` root@OpenWRT:~# ethtool eth0 Settings for eth0: Supported ports: [ MII ] Supported link modes: 1000baseT/Full Supported pause frame use:...

``` root@OpenWRT:~# ethtool -a eth0 Pause parameters for eth0: Autonegotiate: on RX: off TX: off RX negotiated: off TX negotiated: off ```