0x0fe
0x0fe
### Related area adding QSPI mode to the SPI driver ### Hardware specification ESP32, ESP32C3 ### Is your feature request related to a problem? I could not find any implementation...
I use the kanban system to keep a good overview of all projetcts at once and get a fine ganrularity when required (by checking a card). Planka does a very...
Hello,It seems there is no way to assign member(s) to a task. Depending on how we use the kanban such feature is really necessary, otherwise there is not enough granularity...
 I installed docker desktop, and created a new dev environement, which pulled planka github fork. docker-compose -f docker-compose-dev.yml up runs fine, but npm run server:db:init fails because it cannot...
### Board ESP32C3 custom board ### Device Description Custom ESP32C3 board ; The ESP32C3 is only connected to USB-C port, two 74HCT245D buffers (inputs only) and a tact switch (details...
### Board ESP32-C3 custom board ### Device Description custom board with ESP32C3F4H and ultra lo Iq LDO (500nA). ### Hardware Configuration external chips / peripherals have been remove or disconnected...
Hi there, I am trying to run your code (very useful by the way) with another gamepad, which of course uses the same HID service and similar layout (one joystick...
### Related area HOST ### Hardware specification CH32V307 ### Is your feature request related to a problem? The status table is unclear about HOST mode on CH32V307 (there is no...
Everything is in the title, what i would like to do is to load an arbitrary file from ElegantOTA, rather than uploading the whole filesystem partition as a bin file....
On the progressbar, when the value is set to 0 or 0.0, the progress bar is still visible  But, it should not be visible when set to 0.