zymex22
Vacuum Puller (Request)
Is your feature request related to a problem? Please describe. A Puller and Vacuum hopper in one. That would come in handy in some situations.
Describe the solution you'd like Should be like a normal puller, but instead of pulling from a attached stockpile/belt it would pull from a target area regardless if this is a zone or not?
It then output to a cell, belt or stockpile like a normal Puller does.
Should properly have a button to toggle between allow zone pulling or not? maybe?
Describe alternatives you've considered Right now i t can be done with a Vacuum hopper and a puller put close to each other. but this is inconvenient in some cases and vacuum hopper has another type of pull zone shape, than puller has.
Additional context Would add more possibilities to logistics for PRF
So one of these: https://github.com/zymex22/Project-RimFactory-Revived/blob/master/Source/ProjectRimFactory/SAL3/Things/Building_SmartHopper.cs
that can output to an outputcell instead of holding.
Possible uses? LWM: So basically a request for a puller that can pull from
- a stockpile
- an area
- conveyor belts
- growing zone zymex: a vacuum puller that can pickup from a radius of XX, ANYTHING thats on ground, a stockpile cell(only), or belt. will be output into a output cell.
This could be more or less done same way as @Sn1p3rr3c0n just did with I/O pusher. make a smart hopper / vacuum hopper Pusher... that just put directly into next cell after taking it in.
Wouldn't this potentially create an infinite loop? Where the hopper part grabs it, then the puller part dumps it out, then the hopper part grabs it, etc, etc...
not if put onto a belt or I/O =) or if using something like forbid on placing or something =)
its more or less same as doing Vacuum -> Puller -> I/O or Belts =) you just save that puller part of it