zerotier
Layer2 bridge not working
based on : https://zerotier.atlassian.net/wiki/spaces/SD/pages/7471125/Layer+2+Bridging+of+Ethernet+and+ZeroTier+Networks+on+Linux
Debian 11 ; zt 1.8.9 Allow Ethernet Bridging YES Do Not Auto-Assign IPs YES
side A: (dummy0 - 10.0.0.10/8) br99: dummy0 ztmjfpruv7
side B: (dummy0 - 10.0.0.1/8) br99: dummy0 ztmjfpruv7
can't ping from A -> B (or B -> A); if i add ip to zt interface it ping (using zt ip)
Try adding ips to br99.
The bridge interfaces don't technically need ip addresses to bridge traffic. They are only needed if you need to connect to the bridge device on that zerotier network.
after about 99 times trying.. and allot of timeit works, but very slow and after restart it takes arround 30 minutes to start comunicating.... it works but its too slow to use on my case