varunon9
Server not Listen
These links might be useful (Go through all comments) https://github.com/varunon9/Remote-Control-PC/issues/21 https://github.com/varunon9/Remote-Control-PC/issues/8 https://github.com/varunon9/Remote-Control-PC/issues/6 https://github.com/varunon9/Remote-Control-PC/issues/4 You must be entering wrong ipAddress or not connected in local network.
Sir thank you so much for your reply.
On Sun, 30 Sep 2018 at 12:13, Varun kumar [email protected] wrote:
These links might be useful (Go through all comments) #21 https://github.com/varunon9/Remote-Control-PC/issues/21 #8 https://github.com/varunon9/Remote-Control-PC/issues/8 #6 https://github.com/varunon9/Remote-Control-PC/issues/6 #4 https://github.com/varunon9/Remote-Control-PC/issues/4 You must be entering wrong ipAddress or not connected in local network.
— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/varunon9/Remote-Control-PC/issues/23#issuecomment-425700181, or mute the thread https://github.com/notifications/unsubscribe-auth/Ahi7PiZ2E9G9Y_rX_V63IKPInFggL6S0ks5ugG83gaJpZM4XA1u- .
Some days ago, It's work fine but when i connect the ip address just show Toast message Server not listen.. what is the problem and why is occurring?
On Sun, 30 Sep 2018 at 12:15, zain saad [email protected] wrote:
Sir thank you so much for your reply.
On Sun, 30 Sep 2018 at 12:13, Varun kumar [email protected] wrote:
These links might be useful (Go through all comments) #21 https://github.com/varunon9/Remote-Control-PC/issues/21 #8 https://github.com/varunon9/Remote-Control-PC/issues/8 #6 https://github.com/varunon9/Remote-Control-PC/issues/6 #4 https://github.com/varunon9/Remote-Control-PC/issues/4 You must be entering wrong ipAddress or not connected in local network.
— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/varunon9/Remote-Control-PC/issues/23#issuecomment-425700181, or mute the thread https://github.com/notifications/unsubscribe-auth/Ahi7PiZ2E9G9Y_rX_V63IKPInFggL6S0ks5ugG83gaJpZM4XA1u- .
Please check exceptions if nay on terminal/console. Also make sure that you are entering correct ip address (as shown by desktop app) and that your desktop and mobile are connected to same local network.
You can check your ip address using ipconfig (windows) or ifconfig (linux). This IP adress would be same as reported by desktop app.
This should not happen. Can you confirm your IP address from command line as well as from Desktop app if both are same. You can also visit discussions regarding this issue.
Hi sir i have entered correct ipaddress but still show this error can u please provide solution
I was able to fix mine by connecting the mobile app and the desktop app to a dedicated private WiFi network also ensure both the apps are on the same network. I observed that it is very selective of the network it communicates on working on some while returning server not listening on others ...I hope this helps
i connected to same local network and tried on hotspot too but it's showing same issue server not listng and one more issue is there in android studio i have attached an image so u can have a look i hope u reply soon! And i did nothing in netbeans do i need anything to do in it?
@pratiksoni1408 Please note that you have to import RemoteControlPC-Studio subfolder in Android studio and not root project.
This should be imported in Android Studio https://github.com/varunon9/Remote-Control-PC/tree/master/RemoteControlPC-Studio
This should be imported in Netbeans-
https://github.com/varunon9/Remote-Control-PC/tree/master/RemoteControlPC-JavaFXML
Regarding server not listening-
In case you are connected to wifi/LAN or any other private network, you will have multiple IP-Addresses assigned to your system. Desktop app fails to detect all of them (known bug) so you will have to rely on cmd/terminal for getting actual ip address-
ifconfig in Linux
ipconfig in windows
You can open above generated address in your mobile browser (chrome) to check if it is correct, e.g. try opening both addresses in chrome-
- 192.168.43.147 (will work if you have any local server on your machine)
- 192.168.43.147:3000 (desktop app will show connected so you can try this now with app)
Okay I’ll check it out and let you know before evening
On Mon, 16 Sep 2019 at 10:34 AM, Varun kumar [email protected] wrote:
@pratiksoni1408 https://github.com/pratiksoni1408 Please note that you have to import RemoteControlPC-Studio subfolder in Android studio and not root project. This should be imported in Android Studio https://github.com/varunon9/Remote-Control-PC/tree/master/RemoteControlPC-Studio This should be imported in Netbeans-
https://github.com/varunon9/Remote-Control-PC/tree/master/RemoteControlPC-JavaFXML
Regarding server not listening- In case you are connected to wifi/LAN or any other private network, you will have multiple IP-Addresses assigned to your system. Desktop app fails to detect all of them (known bug) so you will have to rely on cmd/terminal for getting actual ip address- ifconfig in Linux ipconfig in windows
You can open above generated address in your mobile browser (chrome) to check if it is correct, e.g. try opening both addresses in chrome-
- 192.168.43.147 (will work if you have any local server on your machine)
- 192.168.43.147:3000 (desktop app will show connected so you can try this now with app)
— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/varunon9/Remote-Control-PC/issues/23?email_source=notifications&email_token=ANGJHVW4NFDKGXHUH3CALW3QJ4HUDA5CNFSM4FYDLO7KYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOD6YDO4I#issuecomment-531642225, or mute the thread https://github.com/notifications/unsubscribe-auth/ANGJHVV3D5OOTUHCATMQYQTQJ4HUDANCNFSM4FYDLO7A .
Bro are you helping me with this?
On Tue, 17 Sep 2019 at 8:51 AM, Pratik Soni [email protected] wrote:
can we resolve this problem if you can contact me on call it'll be pleasure for me!
On Sun, 15 Sep 2019 at 22:04, Varun kumar [email protected] wrote:
@pratiksoni1408 https://github.com/pratiksoni1408 Please note that you have to import RemoteControlPC-Studio subfolder in Android studio and not root project. This should be imported in Android Studio https://github.com/varunon9/Remote-Control-PC/tree/master/RemoteControlPC-Studio This should be imported in Netbeans-
https://github.com/varunon9/Remote-Control-PC/tree/master/RemoteControlPC-JavaFXML
Regarding server not listening- In case you are connected to wifi/LAN or any other private network, you will have multiple IP-Addresses assigned to your system. Desktop app fails to detect all of them (known bug) so you will have to rely on cmd/terminal for getting actual ip address- ifconfig in Linux ipconfig in windows
You can open above generated address in your mobile browser (chrome) to check if it is correct, e.g. try opening both addresses in chrome-
- 192.168.43.147 (will work if you have any local server on your machine)
- 192.168.43.147:3000 (desktop app will show connected so you can try this now with app)
— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/varunon9/Remote-Control-PC/issues/23?email_source=notifications&email_token=ANGJHVW4NFDKGXHUH3CALW3QJ4HUDA5CNFSM4FYDLO7KYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOD6YDO4I#issuecomment-531642225, or mute the thread https://github.com/notifications/unsubscribe-auth/ANGJHVV3D5OOTUHCATMQYQTQJ4HUDANCNFSM4FYDLO7A .
Bro im getting socket closed in my cmd terminal whn i connct n reset in desktop app please help me out it’s urgent.
On Mon, 16 Sep 2019 at 11:13 PM, Pratik Soni [email protected] wrote:
Bro are you helping me with this?
On Tue, 17 Sep 2019 at 8:51 AM, Pratik Soni [email protected] wrote:
can we resolve this problem if you can contact me on call it'll be pleasure for me!
On Sun, 15 Sep 2019 at 22:04, Varun kumar [email protected] wrote:
@pratiksoni1408 https://github.com/pratiksoni1408 Please note that you have to import RemoteControlPC-Studio subfolder in Android studio and not root project. This should be imported in Android Studio https://github.com/varunon9/Remote-Control-PC/tree/master/RemoteControlPC-Studio This should be imported in Netbeans-
https://github.com/varunon9/Remote-Control-PC/tree/master/RemoteControlPC-JavaFXML
Regarding server not listening- In case you are connected to wifi/LAN or any other private network, you will have multiple IP-Addresses assigned to your system. Desktop app fails to detect all of them (known bug) so you will have to rely on cmd/terminal for getting actual ip address- ifconfig in Linux ipconfig in windows
You can open above generated address in your mobile browser (chrome) to check if it is correct, e.g. try opening both addresses in chrome-
- 192.168.43.147 (will work if you have any local server on your machine)
- 192.168.43.147:3000 (desktop app will show connected so you can try this now with app)
— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/varunon9/Remote-Control-PC/issues/23?email_source=notifications&email_token=ANGJHVW4NFDKGXHUH3CALW3QJ4HUDA5CNFSM4FYDLO7KYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOD6YDO4I#issuecomment-531642225, or mute the thread https://github.com/notifications/unsubscribe-auth/ANGJHVV3D5OOTUHCATMQYQTQJ4HUDANCNFSM4FYDLO7A .
@pratiksoni1408 socket exception is fine after resetting/closing connection. Did you try above steps for "server not listening" error?
Ya i tried every possible things i connected it using public ip also but idky it’s not working can u pls contact me on call it will b better it’ll be pleasure for me to have your some time please.
On Wed, 18 Sep 2019 at 4:49 PM, Varun kumar [email protected] wrote:
@pratiksoni1408 https://github.com/pratiksoni1408 socket exception is fine after resetting/closing connection. Did you try above steps for "server not listening" error?
— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/varunon9/Remote-Control-PC/issues/23?email_source=notifications&email_token=ANGJHVTZQAY6UUSQCE7V6ZTQKIFDDA5CNFSM4FYDLO7KYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOD67XAEY#issuecomment-532639763, or mute the thread https://github.com/notifications/unsubscribe-auth/ANGJHVQJPVNKOB5ZBZXXE7DQKIFDDANCNFSM4FYDLO7A .
It’s working now thanks❤️
On Wed, 18 Sep 2019 at 5:06 PM, Pratik Soni [email protected] wrote:
Ya i tried every possible things i connected it using public ip also but idky it’s not working can u pls contact me on call it will b better it’ll be pleasure for me to have your some time please.
On Wed, 18 Sep 2019 at 4:49 PM, Varun kumar [email protected] wrote:
@pratiksoni1408 https://github.com/pratiksoni1408 socket exception is fine after resetting/closing connection. Did you try above steps for "server not listening" error?
— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/varunon9/Remote-Control-PC/issues/23?email_source=notifications&email_token=ANGJHVTZQAY6UUSQCE7V6ZTQKIFDDA5CNFSM4FYDLO7KYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOD67XAEY#issuecomment-532639763, or mute the thread https://github.com/notifications/unsubscribe-auth/ANGJHVQJPVNKOB5ZBZXXE7DQKIFDDANCNFSM4FYDLO7A .
How did you get it working? Please share details here to help others.
On Thu, 19 Sep, 2019, 11:42 AM pratiksoni1408, [email protected] wrote:
It’s working now thanks❤️
On Wed, 18 Sep 2019 at 5:06 PM, Pratik Soni [email protected] wrote:
Ya i tried every possible things i connected it using public ip also but idky it’s not working can u pls contact me on call it will b better it’ll be pleasure for me to have your some time please.
On Wed, 18 Sep 2019 at 4:49 PM, Varun kumar [email protected] wrote:
@pratiksoni1408 https://github.com/pratiksoni1408 socket exception is fine after resetting/closing connection. Did you try above steps for "server not listening" error?
— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub < https://github.com/varunon9/Remote-Control-PC/issues/23?email_source=notifications&email_token=ANGJHVTZQAY6UUSQCE7V6ZTQKIFDDA5CNFSM4FYDLO7KYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOD67XAEY#issuecomment-532639763 , or mute the thread < https://github.com/notifications/unsubscribe-auth/ANGJHVQJPVNKOB5ZBZXXE7DQKIFDDANCNFSM4FYDLO7A
.
— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/varunon9/Remote-Control-PC/issues/23?email_source=notifications&email_token=ACKZZ3GEPVKPTB5TGFQKG5TQKMJ6BA5CNFSM4FYDLO7KYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOD7CKYXY#issuecomment-532982879, or mute the thread https://github.com/notifications/unsubscribe-auth/ACKZZ3B45B7XCQSO76RDFG3QKMJ6BANCNFSM4FYDLO7A .
Ya lll do that one question do u have any documentation or deep report of yur whole app then can u provide me the link it’ll b helpful for me!
On Thu, 19 Sep 2019 at 12:22 PM, Varun kumar [email protected] wrote:
How did you get it working? Please share details here to help others.
On Thu, 19 Sep, 2019, 11:42 AM pratiksoni1408, [email protected] wrote:
It’s working now thanks❤️
On Wed, 18 Sep 2019 at 5:06 PM, Pratik Soni [email protected] wrote:
Ya i tried every possible things i connected it using public ip also but idky it’s not working can u pls contact me on call it will b better it’ll be pleasure for me to have your some time please.
On Wed, 18 Sep 2019 at 4:49 PM, Varun kumar [email protected] wrote:
@pratiksoni1408 https://github.com/pratiksoni1408 socket exception is fine after resetting/closing connection. Did you try above steps for "server not listening" error?
— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub <
https://github.com/varunon9/Remote-Control-PC/issues/23?email_source=notifications&email_token=ANGJHVTZQAY6UUSQCE7V6ZTQKIFDDA5CNFSM4FYDLO7KYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOD67XAEY#issuecomment-532639763
,
or mute the thread <
https://github.com/notifications/unsubscribe-auth/ANGJHVQJPVNKOB5ZBZXXE7DQKIFDDANCNFSM4FYDLO7A
.
— You are receiving this because you commented. Reply to this email directly, view it on GitHub < https://github.com/varunon9/Remote-Control-PC/issues/23?email_source=notifications&email_token=ACKZZ3GEPVKPTB5TGFQKG5TQKMJ6BA5CNFSM4FYDLO7KYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOD7CKYXY#issuecomment-532982879 , or mute the thread < https://github.com/notifications/unsubscribe-auth/ACKZZ3B45B7XCQSO76RDFG3QKMJ6BANCNFSM4FYDLO7A
.
— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/varunon9/Remote-Control-PC/issues/23?email_source=notifications&email_token=ANGJHVS5FAJH5DDMPA56MGDQKMOSTA5CNFSM4FYDLO7KYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOD7CNNSI#issuecomment-532993737, or mute the thread https://github.com/notifications/unsubscribe-auth/ANGJHVRI2HUXDFQ7SAATELTQKMOSTANCNFSM4FYDLO7A .
Dude why is not running in multiple devices it’s running only in some android phone why so in another phones server error is nly there like before why it’s happening?
On Thu, 19 Sep 2019 at 7:37 PM, Pratik Soni [email protected] wrote:
Ya lll do that one question do u have any documentation or deep report of yur whole app then can u provide me the link it’ll b helpful for me!
On Thu, 19 Sep 2019 at 12:22 PM, Varun kumar [email protected] wrote:
How did you get it working? Please share details here to help others.
On Thu, 19 Sep, 2019, 11:42 AM pratiksoni1408, [email protected] wrote:
It’s working now thanks❤️
On Wed, 18 Sep 2019 at 5:06 PM, Pratik Soni [email protected] wrote:
Ya i tried every possible things i connected it using public ip also but idky it’s not working can u pls contact me on call it will b better it’ll be pleasure for me to have your some time please.
On Wed, 18 Sep 2019 at 4:49 PM, Varun kumar <[email protected]
wrote:
@pratiksoni1408 https://github.com/pratiksoni1408 socket exception is fine after resetting/closing connection. Did you try above steps for "server not listening" error?
— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub <
https://github.com/varunon9/Remote-Control-PC/issues/23?email_source=notifications&email_token=ANGJHVTZQAY6UUSQCE7V6ZTQKIFDDA5CNFSM4FYDLO7KYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOD67XAEY#issuecomment-532639763
,
or mute the thread <
https://github.com/notifications/unsubscribe-auth/ANGJHVQJPVNKOB5ZBZXXE7DQKIFDDANCNFSM4FYDLO7A
.
— You are receiving this because you commented. Reply to this email directly, view it on GitHub < https://github.com/varunon9/Remote-Control-PC/issues/23?email_source=notifications&email_token=ACKZZ3GEPVKPTB5TGFQKG5TQKMJ6BA5CNFSM4FYDLO7KYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOD7CKYXY#issuecomment-532982879 , or mute the thread < https://github.com/notifications/unsubscribe-auth/ACKZZ3B45B7XCQSO76RDFG3QKMJ6BANCNFSM4FYDLO7A
.
— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/varunon9/Remote-Control-PC/issues/23?email_source=notifications&email_token=ANGJHVS5FAJH5DDMPA56MGDQKMOSTA5CNFSM4FYDLO7KYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOD7CNNSI#issuecomment-532993737, or mute the thread https://github.com/notifications/unsubscribe-auth/ANGJHVRI2HUXDFQ7SAATELTQKMOSTANCNFSM4FYDLO7A .