xvcd

xvcd copied to clipboard

fix: ftdi_write_data, ftdi_set_bitmode, not used bits must be set to 1

7

Hi, I was testing your code with the following setup and it did not work. - raspbery PI 2B, - vivado 2018.2 - arty35T FPGA with FTDI (Bus 001 Device...

rhasst

When using impact to program a connected SPI flash the program prints buffer size exceeded. The programming of the flash fails but impact displays programming succeeded. The used board was...

schuschu

Add FT2232H support

2

Add support for FT2232H chip (e.g. Digilent Nexys Video). Previously, the code implicitly assumed an FT2232C. When connecting to an FT2232H, extra GPIO pins (notably `ADBUS4`) were incorrectly configured as...

CanardConfit