RedPitayaDAQServer
RedPitayaDAQServer copied to clipboard
tknopp
Advanced DAQ Tools for the RedPitaya (STEMlab 125-14)
Hello everyone, I am using freshly installed Julia and the last version of the DAQ server from here. When I try to connect to the RP board, it always gives...
The CIC-Compiler has a non-flat amplitude response. This can be compensated according to [this article](https://www.koheron.com/blog/2016/10/03/decimator-cic-filter). Additionally the input stage has some issues according to [this forum entry](http://forum.redpitaya.com/viewtopic.php?f=9&t=468). The original image...
Hi, Thanks again for your work on this project. I'm getting severe ringing on the signals I'm trying to measure using this image. The decimation filter added with V0.6.0 doesn't...
Hi, when trying to use the `update!` function to update a RedPitaya to the newest v0.6.0 release, the build process https://github.com/tknopp/RedPitayaDAQServer/blob/12b4178cc27f0a9b31cd64a948e06f5dd3c1999f/src/client/julia/src/Utility.jl#L181 of the server fails. I found the culprit to...
This issue is related to #5: The input stage has some flaws which are being corrected by a filter. This filter has two constants AA and BB which differ for...
Until now, the synchronous acquisition of the slow ADC values is not possible since they are neither buffered nor timestamped. In order to use them properly, this is an important...
A compensation for the gain change by the CIC was missing. This results in different scalings when changing decimations. The result for a simple DC offset looks then like the...
Hey folks, I am currently trying to use this on the SDRLab122-16 and it works relatively well with a few changes on Vivado (clocks, 16 bit ADC). The issue I...
