openfixture
openfixture copied to clipboard
tinylabs
Open Source Hardware Test/Programming Fixture
I have tried to use OpenFixture and it seems that procedure to export from Kicad to DXF now is not compatible according to the indications given in OpenFixture documentation. [https://tinylabs.io/openfixture-kicad-export/]...
Hi, I did a little upgrade so it will work with recent Kicad versions. I think there is a little issue with mirroring the pcb outline when B.Cu is used,...
Verifying the number of test points is > 0 avoids silently generating a malformed test fixture. Changing "border" to "pcb_support_border" allows the border specified in the shell script to be...
It doesn't seem so, should I just adjust material thickness with a fudge factor?
The latch pivot is too far back for my board -- should be a fixed distance, rather than a percentage of overall height.
As discussed: https://github.com/ebuller/openfixture/issues/6 Inkscape only outputs sizes in pixels. This assumes 90 DPI. Doesn't seem to be a CLI option for Inkscape to get it's current DPI setting.
As discussed: https://github.com/ebuller/openfixture/issues/6
The laser cutting service tweaked my DXF manually to save costs significantly, fitting the parts on an A2 acrylic material sheet: I believe this can be easily achieved parametrically/automatically by...
