Problem function use an object before object declaration

[thierry7100]

Hi In some cases with functions, I have a problem because the functions will refer to an object before the object declaration. Here is an example of the generated code: The function "AfficheHeure" will use the object lcd before its declaration, this will lead to compiler error within tthe Arduino IDE.

#include <Wire.h> #include <LiquidCrystal_I2C.h>

int Heure; int Minute; int Seconde; int Jour; int Mois; int Annee; unsigned long MemSeconde;

// Décrire cette fonction void AfficheHeure() { if (Heure < 10) { lcd.setCursor(3,0); lcd.print("0"); lcd.setCursor(4,0); lcd.print(Heure);

} else { lcd.setCursor(3,0); lcd.print(Heure);

} lcd.setCursor(5,0); lcd.print(":"); if (Minute < 10) { lcd.setCursor(6,0); lcd.print("0"); lcd.setCursor(7,0); lcd.print(Minute);

} else { lcd.setCursor(6,0); lcd.print(Minute);

} lcd.setCursor(8,0); lcd.print(":"); if (Seconde < 10) { lcd.setCursor(9,0); lcd.print("0"); lcd.setCursor(10,0); lcd.print(Seconde);

} else { lcd.setCursor(9,0); lcd.print(Seconde);

} if (Jour < 10) { lcd.setCursor(2,1); lcd.print("0"); lcd.setCursor(3,1); lcd.print(Jour);

} else { lcd.setCursor(2,1); lcd.print(Jour);

} lcd.setCursor(4,1); lcd.print("/"); if (Mois < 10) { lcd.setCursor(5,1); lcd.print("0"); lcd.setCursor(6,1); lcd.print(Mois);

} else { lcd.setCursor(5,1); lcd.print(Mois);

} lcd.setCursor(7,1); lcd.print("/"); lcd.setCursor(8,1); lcd.print(Annee); }

LiquidCrystal_I2C lcd(0x3F, 16, 2); // Décrire cette fonction void MiseAJourHeure() {_