FlexCAN_Library
FlexCAN_Library copied to clipboard
teachop
Arduino library for CAN on Teensy 3.1
Hello, In my Teensy 3.2 Project is an CAN_Write() in an 1ms Interrupt program. The "Loop()" section should poll the CANBus with CAN_Read(). Interruptprogram works fine all the time. The...
Hi, I'm having a hard time figuring out whether this library supports CAN2.0A only or if CAN2.0B (extended) is supported also.
I am working with Teensy 3.6 with the "Dual CAN-Bus adapter for Teensy 3.5, 3.6". Though in all examples, the pins are set to "HIGH", but I must set them...
Line 6 & 14 of the Updated_ReadMe.md file seem to contain conflicting information regarding connecting a Teensy to a CAN Transceiver. Should the TX and RX Teensy pins be connected...
Hello, is it possible to add a function to check that the Can Bus is synchronized. There is a Flag in the ESR1 register, CAN Synchronization Status. I want a...
Dear Sir, if a bus off state occurs, is there an option to recover that state and automatically reconnect to the bus? Thank you, Nikos
First call of setup assumes header was loaded and controller is still in freeze mode. A second call of setup or a setFilter AFTER the setup() is called, a hard...
