PSP-Consolizer
PSP-Consolizer copied to clipboard
ste2425
An Arduino based addon board to give Bluetooth controller support to a PSP-2000
I want to make it for my psp 3000, is it compatible? do you have twitter to follow your work?
There is enough space in the PSP to fit an Arduino inside if the UMD drive was removed. Building a PCB to fit all needed hardware _should_ work and be...
Currently the Consolizer will shutdown when a controller turns it self off, disconnecting. The time this takes varies per controller the PS4 takes around 7-8 seconds holding the PS button....
really 140 Ohm Resistor for the LED? Thats a Really unusale Resistor and hard to find. Most sell only 130 or 150 Ohm als normal. 140 ohm as smd yeah...
Of all my ideas I think this has the most quality of life potential for future users. A display on the mappings page that shows the user the current mapping...
A PSP3000 motherboard that is not supported by current hardware was discovered. The left-side ribbon cable has 11 pins, and the motherboard model is 07G. It is a rather special...
As per the Custom Button Mapping guide, once mappings are saved they should be switchable via "clicking in on the left thumbstick" or by holding down "L and R then...
If I pull open the VSH menu in the ARK-4 CFW by hitting Select in the XMB, the VSH menu appears, but no controller inputs are registered. I am forced...
I can't seem to flash the board through USB. I'm getting this error ``` Downloading binary... Downloaded, size: 879136 Getting connection to ESP... esptool.js Serial port WebSerial VendorID 0x1a86 ProductID...
The Options and Share button are swapped in the controller diagram. The text reads correctly (aside from the fact that PS4 buttons are labeled Share and Options instead of Capture...