SRSGUI TEST EXECUTABLE: plots are disabled. Graphics library not available

[ivyselly]

Hi, please i'm trying to run the pdsch_ue test program using a file as rf source. I would like to see the plots of this test to compare it with the plots i get when running my srsue with the usrp for the same configure frequency and sampling rate.

However there's no argument option to enable gui for the test, and when i use the --help option, i get this log below;

`-F Enable RS-based CFO correction [Default Disabled] -R Channel estimates algorithm (average, interpolate, wiener) [Default interpolate] -t Add time offset [Default 0] -T Set TDD special subframe configuration [Default -1] -G Set TDD uplink/downlink configuration [Default -1]

 **plots are disabled. Graphics library not available**


-y set the cpu affinity mask [Default -1] 
-n nof_subframes [Default -1]
-s remote UDP port to send input signal (-1 does nothing with it) [Default -1]
-S remote UDP address to send input signal [Default 127.0.0.1]
-u remote TCP port to send data (-1 does nothing with it) [Default -1]
-U remote TCP address to send data [Default 127.0.0.1]

`

i'd like to know if there is a way to enbale the plots or an alternative way to do this

@andrepuschmann any help please