solarmon

@IanSB Just tried on a Raspberry Pi 3A+ and it seems to be working great too!

@IanSB Is audio mixing really a viable option with the Pi Zero W 2? On the RGBtoHDMI board on the CDTV Video Slot that I'm working on, the audio signals...

> @solarmon > > > Is audio mixing really a viable option with the Pi Zero W 2? > > I think so as a core could be dedicated to...

> I've just released Beta 45 of RGBtoHDMI: https://github.com/IanSB/RGBtoHDMI/releases Please give it a try and report any issues > > This version is a release candidate for the next stable...

Does the resistor need to be 1K? Can it be 3K3? I want to do parts consolidation and make use of the 3K3 already used on the RGBtoHDMI board. Or,...

@IanSB The FF OSD build recommends a 270ohm resistor for the PB15 line. I assume this 1K resistor is meant to replace this 270ohm resistor? Is there a technical reason...

@kipper2k Regarding your comment about caps being close to IC's as possible. These are just relocation boards for the Pi connector. I'm not changing anything with the RGBtoHDMI boards. The...

I'm actually seeing this shimmering/sparkle artefact using a normal RGBtoHDMI setup - i.e. no relocator or anything. With the normal setup setup, in the Amiga Test Kit screen, I don't...

So I think I have narrowed down the issue a bit. It seems this issue is only specific to this X-Copy disk I'm using to test. Everything else I've tried...

> This is the same fault I wrote about here => [#11 (comment)](https://github.com/c0pperdragon/Amiga-Digital-Video/issues/11#issuecomment-769056224) > > I'm also using a slightly longer connection through a very short IDC cable. I tested...