tgy

tgy copied to clipboard

Firmware for this yellow generic cheap ESC

3

This is one of the most sold ESCs in Brazil and I despite being very common, I cant find any reference pointing me to the right firmware to flash. Would...

batata004

Using SimonK with the Atmega 168P or Atmega328P

1

someone tried to change the code to be compatible with Atmega168P or Atmega328P?

StoicaMad

Hi haven’t flashed yet just have a quick question. i burnt some of the fets on my redbrick 200a board and I have a second one today that I was...

Corypi

Hello i built my own design esc its got two leds on PC2 and PC3 and runs on a 16mhz crystal, aswell as a dedicated n-fet gate drive ic. after...

gamerpaddy

How does Simonk modify the stop time after start-up stall failure? It needs to stop after 1 second I really need this feature

a146860

How to write tgy. Inc apfet bpfet cpfet inversion PFET needs to be reversed

a146860

Yellow ESC

4

Has anyone been successful flashing those yellow Chinese ESCs? I stripped one, see board shots below:  

diego0815

e-skateboard brakes

3

Trying to replicated https://endless-sphere.com/forums/viewtopic.php?f=35&t=74880 braking. currently hacking: run_reverse: rcall wait_for_low nFET_brake_on i_temp1 sync_on rcall wait_for_high nFET_brake_off i_temp1 rcall wait_for_low nFET_brake_on i_temp1 rcall wait_for_high nFET_brake_off i_temp1 sync_off rcall wait_for_low nFET_brake_on i_temp1...

youbobcat

Fix a typo in a comment.

1

MatthewBregg

Asymmetric reversal response issue?

2

I'm seeing a peculiar issue where driving a BlueRobotics T200 in the reverse direction and then quickly driving it in the forward direction causes it to appear to wait for...

alspitz