rog77
rog77
Might I ask, presuming you are allowed to discuss the code, is there much similarity to this: https://github.com/sipeed/RV-Debugger-BL702 Based on the fact that it does usb2uartjtag and is also a...
It's pikapython, I asked the devs and they were kind enough to implement USB Serial Repl for it, as opposed to the default UART pins, but I don't think the...
https://github.com/emard/esp32ecp5/blob/master/circuitpython/jtag.py I was pondering something like this on the BL616, like run a menu to pick a bitstream from SF and flash it to SRAM without needing any other hardware...
> hi, there is a project for Gowin JTAG programming using the CH552T µC that had been used on the very first Tang Nano 1k 2704 revision (still with 24Mhz...
Interesting! Thanks for setting me straight on the ram issue. I presume it is capable of doing HID at the same time as mass storage? I really do think it...
Nice work :-) Alas I am no C programmer, hence my interest in using uPython or the like to have the BL616 do JTAG without a PC (yet that is...
That certainly sounds positive, if you feel it is something you might consider doing, I would ask HC Ceng about integrating it into peforth. It seems to me that you...
I am pleased that you have found common ground with HC Ceng, and I look forward to seeing what you come up with :-) If it isn't too impertinent, I...
Thank you for the update, and your efforts. You have a great project going on here!