firmware

firmware copied to clipboard

480i no longer working under fkms

5

As of efe79c1df6df24e666c08dd68e1636ed24210fc1, switching into 480i causes my TV to report "no signal". This is outside of x, using modetest. I don't see any error messages in dmesg. reverting back...

alanbork

**Describe the bug** If I shutdown the pi (in my case, a Pi0), and boot after the clean shutdown, the `disable_overscan=1` setting in config.txt is respected. If I "pull the...

theofficialgman

PoE+ Hat fan not spinning unless manually setting the overlay.

14

**Describe the bug** I'm finding that the fan on the PoE+ hat is not turning on. I'm using a Pi 4 4GB and netbooting it. Nothing pops up in dmesg...

matty0005

Raspberry Pi 4 won't boot anymore

60

 Hi, I've been using this Raspberry for a while, and have had it running octopi for at almost a year. The other day, after installing PiVPN on it, and...

daniframinan

Early CM3 versions when booting from eMMC require boot partition to be FAT-32 (but can be FAT-16 from USB)

1

Hi, After extensive debug including attempting old and new bootcode I reached this conclusion: Boot from FAT-16: Not possible: - Some CM3 boards from eMMC Possible: - The same boards...

nunojpg

Pi4 reboot not reliable, hangs forever while rebooting.

74

**Is this the right place for my bug report?** Not exactly sure, the Raspberry Pi4 hangs when rebooting, often at the rainbow screen, so I suspect it's the firmware. But...

ganzgustav22

**Describe the bug** The Pi 4 includes the ability to set a TFTP_IP value in the EEPROM, a very useful feature when the network boot server has a known fixed...

gbaman

regular warnings `mmc1 timeout waiting for hardware cmd interrupt`

24

**Is this the right place for my bug report?** Using a Debian installation from [https://raspi.debian.net/daily-images/] specifically [https://raspi.debian.net/daily/raspi_4_bullseye.img.xz] which uses the firmware from here, I hope the report is appropriate. I...

andrewufrank

can't change current resolution of the framebuffer on pi4, /sys/class/display missing?

21

Using a Pi4 with FKMS I'm trying to change the resolution of the console while not running X, as we used to be able to do with tvservice on the...

alanbork

Non working VC4 with upstream kernels

39

VC4 stopped working with upstream kernels after bd88f66f8952d34e4e0613a85c7a6d3da49e13e2. The VC4 modules load but VC4 does not work. This issue is the same with all upstream kernels I tried: ``` [ray@pi4...

Dark-Sky