pyKY040

pyKY040 copied to clipboard

Try adding a ```start=0``` to the encoder setup, so that it starts at 0 and if you turn the encoder ti negtive values it gets to -1

Leo-Aqua

Switch Pin with "device" configuration

5

I'm trying to use the "device" configuration rather than the GPIO pins and I have it working perfectly for the rotary encoder. How would I go about monitoring the button...

beaconIOT

Add long and short switch pressed

1

Is it possible to have two options on the switch, pressed short and long? Babau

duedipicche

Hi, Looking at the code it seems DT + CLK are pulled low. The common carrier board has 10K pull-ups, which presumably override this so the DT + CLK become...

naggie

Add initial position value

3

Bcow7

added some new things

1

added scale_start, volume control sample, changed version number

dhlalit11

Double input

9

I'm opening a new issue to hopefully get more visibility there... Having a similar same issue: `inc_callback`, `dec_callback`& `chg_callback` get called multiple time for each "steps" of my rotary encoder....

SebDominguez