natflow icon indicating copy to clipboard operation
natflow copied to clipboard

natflow hack kernel module

Results 6 natflow issues
Sort by recently updated
recently updated
newest added

995-0001-hwnat-add-natflow-flow-offload-support.patch kmod-natflow natflow-boot 除了以上三项, 还需要其他步骤吗, 谢谢.

hi, @meisreallyba referred me to your work (https://github.com/hanwckf/rt-n56u/issues/562#issuecomment-759916174) i am curious if i install this module, will this replace the need for RA_HW_NAT? or do i still enable RA_HW_NAT in...

我克隆x-wrt中的com.x-wrt仓库到lede源代码里,选择好相对应的编译选项,编译natflow成功了,虽然hwnat能够正常工作,但是pppoe转发到接口这部分并不工作,我想了解如何处理 ## 流量会经过的路径说明 设备 -> lan-> pppoe -> eth1.41 eth1是猫棒 41是vlan端口 ## 这个是接口流量统计图 ![image](https://github.com/ptpt52/natflow/assets/36808766/cfbc9af7-c9fc-42e9-88bc-51d2bac1918b) ##内核版本 Linux OpenWrt 5.15.133 #0 SMP Fri Oct 13 05:53:09 2023 aarch64 GNU/Linux ## openwrt版本 OpenWrt...

Without WED speed between clients (iperf3) drops to zero after 1 second.

mt7981 rax 3000m usb wwan speed is degraded when hwnat and hwnat with wed is enabled (10-100Mbps) when hwnat is turned off. USB wwan speed returned to normal (500Mbps)

PVE 8.2 X86 openwrt虚拟机 23.05.4 来源于 https://github.com/sbwml/builder 内置了natflow 单臂主路由模式(单网卡,network配置随后) 设置pppoe拨号 从系统日志看natflow正常加载,然后成功启动后一两分钟虚拟机自动崩溃重启 ```config interface 'loopback' option proto 'static' option ipaddr '127.0.0.1' option netmask '255.0.0.0' option device 'lo' config globals 'globals' option...