box86
box86 copied to clipboard
ptitSeb
Setup and compilation for Olimex A20
The board: https://www.olimex.com/Products/OLinuXino/A20/A20-OLinuXino-LIME2/open-source-hardware
- $ uname -a
Linux a20-olinuxino 5.10.47-olimex #080601 SMP Wed Jul 7 08:07:39 UTC 2021 armv7l armv7l armv7l GNU/Linux - $ sudo lshw
a20-olinuxino
description: ARMv7 Processor rev 4 (v7l)
product: Olimex A20-OLinuXino-LIME2
serial: 00013e8d
width: 32 bits
capabilities: smp
*-core
description: Motherboard
physical id: 0
*-cpu:0
description: CPU
product: cpu
physical id: 0
bus info: cpu@0
size: 720MHz
capacity: 960MHz
capabilities: half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm cpufreq
*-cpu:1
description: CPU
product: cpu
physical id: 1
bus info: cpu@1
size: 720MHz
capacity: 960MHz
capabilities: half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm cpufreq
*-memory
description: System memory
physical id: 2
size: 998MiB
*-scsi
physical id: 3
logical name: scsi0
capabilities: emulated
*-disk
description: ATA Disk
product: WDC WD6400BPVT-6
vendor: Western Digital
physical id: 0.0.0
bus info: scsi@0:0.0.0
logical name: /dev/sda
version: 1A01
serial: WD-WX41A11C8438
size: 596GiB (640GB)
capabilities: gpt-1.00 partitioned partitioned:gpt
configuration: ansiversion=5 guid=b5cd3ebd-5686-1548-a094-db9ea10fa596 logicalsectorsize=512 sectorsize=4096
*-volume
description: EXT4 volume
vendor: Linux
physical id: 1
bus info: scsi@0:0.0.0,1
logical name: /dev/sda1
logical name: /mnt/Disk
version: 1.0
serial: 3aa73106-944c-4c66-809f-d2b99d9c863c
size: 596GiB
capacity: 596GiB
capabilities: journaled extended_attributes large_files huge_files dir_nlink recover 64bit extents ext4 ext2 initialized
configuration: created=2021-07-06 19:29:38 filesystem=ext4 lastmountpoint=/mnt/Disk modified=2021-07-16 11:33:46 mount.fstype=ext4 mount.options=rw,nodev,relatime mounted=2021-07-16 11:33:46 state=mounted
*-usbhost:0
product: EHCI Host Controller
vendor: Linux 5.10.47-olimex ehci_hcd
physical id: 2
bus info: usb@1
logical name: usb1
version: 5.10
capabilities: usb-2.00
configuration: driver=hub slots=1 speed=480Mbit/s
*-usbhost:1
product: EHCI Host Controller
vendor: Linux 5.10.47-olimex ehci_hcd
physical id: 3
bus info: usb@2
logical name: usb2
version: 5.10
capabilities: usb-2.00
configuration: driver=hub slots=1 speed=480Mbit/s
*-usb
description: USB hub
product: USB 2.0 Hub
vendor: Terminus Technology Inc.
physical id: 1
bus info: usb@2:1
version: 1.11
capabilities: usb-2.00
configuration: driver=hub maxpower=100mA slots=4 speed=480Mbit/s
*-usb
description: Human interface device
product: USB to Serial
vendor: INNO TECH
physical id: 4
bus info: usb@2:1.4
version: 0.02
capabilities: usb-1.10
configuration: driver=usbhid maxpower=100mA speed=2Mbit/s
*-usbhost:2
product: Generic Platform OHCI controller
vendor: Linux 5.10.47-olimex ohci_hcd
physical id: 4
bus info: usb@3
logical name: usb3
version: 5.10
capabilities: usb-1.10
configuration: driver=hub slots=1 speed=12Mbit/s
*-usbhost:3
product: Generic Platform OHCI controller
vendor: Linux 5.10.47-olimex ohci_hcd
physical id: 5
bus info: usb@4
logical name: usb4
version: 5.10
capabilities: usb-1.10
configuration: driver=hub slots=1 speed=12Mbit/s
*-usbhost:4
product: MUSB HDRC host driver
vendor: Linux 5.10.47-olimex musb-hcd
physical id: 1
bus info: usb@5
logical name: usb5
version: 5.10
capabilities: usb-2.00
configuration: driver=hub slots=1 speed=480Mbit/s
*-network
description: Ethernet interface
physical id: 6
logical name: eth0
serial: 30:1f:9a:d0:a0:83
size: 1Gbit/s
capacity: 1Gbit/s
capabilities: ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=st_gmac driverversion=Jan_2016 duplex=full ip=192.168.0.7 link=yes multicast=yes port=twisted pair speed=1Gbit/s
Basically I am trying to use Box x86 to run x86 stuff on my olimex board with ARM7 processor, but I am unable to do it. Your colleague requested the CPU info from me.