projectcalico
[libnetwork] cali interface not show on other host and cannot ping in the same network
My deployment deploy docker container with calico network have 2 nodes (virtual machine created by KVM).
- node 1: hostname = docker and ip = 192.168.122.45
- node 2: hostname = database and ip = 192.168.122.13
when I done all step, I get state:
root@docker:~# calicoctl node status
Calico process is running.
IPv4 BGP status
+-----------------+-------------------+-------+----------+-------------+
| PEER ADDRESS | PEER TYPE | STATE | SINCE | INFO |
+-----------------+-------------------+-------+----------+-------------+
| 192.168.122.13 | node-to-node mesh | up | 08:11:11 | Established |
+-----------------+-------------------+-------+----------+-------------+
IPv6 BGP status
No IPv6 peers found.
root@database:~# calicoctl node status
Calico process is running.
IPv4 BGP status
+-----------------+-------------------+-------+----------+-------------+
| PEER ADDRESS | PEER TYPE | STATE | SINCE | INFO |
+-----------------+-------------------+-------+----------+-------------+
| 192.168.122.45 | node-to-node mesh | up | 08:11:10 | Established |
+-----------------+-------------------+-------+----------+-------------+
IPv6 BGP status
No IPv6 peers found.
I got two problems as follow:
- I created a ipPool and a network and two container in this network:
root@docker:~# cat << EOF | calicoctl create -f -
> - apiVersion: v1
> kind: ipPool
> metadata:
> cidr: 192.0.2.0/24
> EOF
Successfully created 1 'ipPool' resource(s)
root@docker:~# docker network create --driver calico --ipam-driver calico-ipam --subnet=192.0.2.0/24 my_net
0946dcb47a02515b80edbb09eadd170683bca7510d7a9d50656990760faab026
root@docker:~# docker run --net my_net --name my_workload --ip 192.0.2.100 -tid busybox
028462ea67ebb8ed2d8678b30cf158657cf2328b3fb39e70b4fe6be0534f5833
root@docker:~# docker inspect -f '{{range .NetworkSettings.Networks}}{{.IPAddress}}{{end}}' my_workload
192.0.2.100
root@docker:~#docker run --net my_net --name my_workload01 --ip 192.0.2.200 -tid busybox
bb3777ffdbc5ec02671a6e152b6a84d2fac61e90c7cb11b20589e8f1c02e0630
root@docker:~# docker inspect -f '{{range .NetworkSettings.Networks}}{{.IPAddress}}{{end}}' my_workload01
192.0.2.200
And then, I tried to ping from container my_workload to container my_workload01 but it's failed.
root@docker:~# docker exec my_workload ping -c 4 my_workload01.my_net
PING my_workload01.my_net (192.0.2.200): 56 data bytes
--- my_workload01.my_net ping statistics ---
4 packets transmitted, 0 packets received, 100% packet loss
2, I can see these container's IP on docker host, but not on database host:
root@docker:~# route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
0.0.0.0 192.168.122.1 0.0.0.0 UG 0 0 0 ens3
10.10.10.0 192.168.122.13 255.255.255.192 UG 0 0 0 ens3
25.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 ham0
100.64.100.0 192.168.122.13 255.255.255.192 UG 0 0 0 tunl0
100.64.100.4 0.0.0.0 255.255.255.255 UH 0 0 0 cali7d5062fda79
100.64.100.8 0.0.0.0 255.255.255.255 UH 0 0 0 calic0d781ea16e
100.64.100.128 0.0.0.0 255.255.255.192 U 0 0 0 *
100.64.100.192 192.168.122.13 255.255.255.192 UG 0 0 0 tunl0
172.17.0.0 0.0.0.0 255.255.0.0 U 0 0 0 docker0
192.0.2.64 0.0.0.0 255.255.255.192 U 0 0 0 *
192.0.2.100 0.0.0.0 255.255.255.255 UH 0 0 0 calif7149fe5d58
192.0.2.192 0.0.0.0 255.255.255.192 U 0 0 0 *
192.0.2.200 0.0.0.0 255.255.255.255 UH 0 0 0 calia50a4846148
192.168.122.0 0.0.0.0 255.255.255.0 U 0 0 0 ens3
root@database:~# route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
0.0.0.0 192.168.122.1 0.0.0.0 UG 0 0 0 ens3
10.10.10.0 0.0.0.0 255.255.255.192 U 0 0 0 *
25.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 ham0
100.64.100.0 0.0.0.0 255.255.255.192 U 0 0 0 *
100.64.100.128 192.168.122.45 255.255.255.192 UG 0 0 0 tunl0
100.64.100.192 0.0.0.0 255.255.255.192 U 0 0 0 *
172.17.0.0 0.0.0.0 255.255.0.0 U 0 0 0 docker0
192.0.2.64 192.168.122.45 255.255.255.192 UG 0 0 0 ens3
192.0.2.192 192.168.122.45 255.255.255.192 UG 0 0 0 ens3
192.168.122.0 0.0.0.0 255.255.255.0 U 0 0 0 ens3
I aslo tried with IPIP mode, but I got the same error can anyone help me: why cali* interfaces not shown in other host? why ping failed between containers in the same host and the same network, please?
My Environment
- calicoctl version (e.g.
calicoctl version):
root@docker:~# calicoctl version
Client Version: v1.6.3
Build date: 2017-12-20T22:32:36+0000
Git commit: d4cfc95c
Cluster Version: v2.6.8
Cluster Type: unknown
- calico/node version (e.g.
docker run --rm calico/node versions): v2.6.8 - Orchestrator type and version (e.g. kubernetes, mesos, rkt): docker
- Operating System and version: Ubuntu 16.04.2 LTS
- Link to your project (optional):
The cali interfaces will only show up on nodes that are actually running the containers, so I think that's OK since you launched the continers on only one node.
To figure out why ping isn't working, I'd recommend using tcpdump to view the traffic and see where it gets dropped.
Also iptables-save -c | grep DROP to see if any iptables rules are dropping the traffic.
@caseydavenport thanks for your response.
I know that when I create a container on one node (docker node), on other node that peer with docker node will create a route in the node's routing table (database node).
This route has :
- Destination field is IP of the container that I created on
dockernode. - Gateway field is IP of the docker node that container was created.
But, I don't see that on other peer with
dockernode. is this correct for this calico version?
You most likely won't see a specific IP of the container but a subnet on the database node. That is why you see
192.0.2.64 192.168.122.45 255.255.255.192 UG 0 0 0 ens3
192.0.2.192 192.168.122.45 255.255.255.192 UG 0 0 0 ens3
Calico uses /26 subnets to reduce the number of routes to distribute low.
Above I said 'most likely' because if you have used up all the /26 subnets and a node needs another address it can use an IP from a subnet another host has claimed but will then distribute that specific route and the more specific route takes precedence.
@tmjd thanks for your explanation and sorry for delay reply.
Now, I know why some IP of containers didn't shown in routing table on other node.
But a little sad, when I ping between two container on one node. It's failed.
by tcpdump on these container's interface, I see that the destination container got ICMP request packet, but I don't see any reply packet.
# docker inspect -f '{{range .NetworkSettings.Networks}}{{.IPAddress}}{{end}}' centos-ssh13
10.10.20.21
# docker inspect -f '{{range .NetworkSettings.Networks}}{{.IPAddress}}{{end}}' centos-ssh12
10.10.20.10
# route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
0.0.0.0 192.168.122.1 0.0.0.0 UG 0 0 0 ens3
10.10.10.0 192.168.122.13 255.255.255.192 UG 0 0 0 tunl0
10.10.10.10 0.0.0.0 255.255.255.255 UH 0 0 0 cali7721a9c82ab
10.10.10.64 192.168.122.13 255.255.255.192 UG 0 0 0 tunl0
10.10.10.128 0.0.0.0 255.255.255.192 U 0 0 0 *
10.10.20.0 0.0.0.0 255.255.255.192 U 0 0 0 *
10.10.20.10 0.0.0.0 255.255.255.255 UH 0 0 0 cali9027171f6c6
10.10.20.12 0.0.0.0 255.255.255.255 UH 0 0 0 cali0b54a54a96c
10.10.20.13 0.0.0.0 255.255.255.255 UH 0 0 0 cali5c2866a2deb
10.10.20.14 0.0.0.0 255.255.255.255 UH 0 0 0 calib316fafae20
10.10.20.20 192.168.122.13 255.255.255.255 UGH 0 0 0 tunl0
10.10.20.21 0.0.0.0 255.255.255.255 UH 0 0 0 cali5d7128fa54b
25.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 ham0
172.17.0.0 0.0.0.0 255.255.0.0 U 0 0 0 docker0
192.168.122.0 0.0.0.0 255.255.255.0 U 0 0 0 ens3
# docker exec -it centos-ssh13 /bin/bash
[root@aca0a99ef00e /]# ping 10.10.20.10
PING 10.10.20.10 (10.10.20.10) 56(84) bytes of data.
and at the same time, at the interface of the container that has IP 10.10.20.10:
# tcpdump -i cali9027171f6c6
tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
listening on cali9027171f6c6, link-type EN10MB (Ethernet), capture size 262144 bytes
01:33:08.271422 IP 10.10.20.21 > 10.10.20.10: ICMP echo request, id 127, seq 1, length 64
01:33:09.271116 IP 10.10.20.21 > 10.10.20.10: ICMP echo request, id 127, seq 2, length 64
01:33:10.271090 IP 10.10.20.21 > 10.10.20.10: ICMP echo request, id 127, seq 3, length 64
01:33:11.271115 IP 10.10.20.21 > 10.10.20.10: ICMP echo request, id 127, seq 4, length 64
01:33:12.271135 IP 10.10.20.21 > 10.10.20.10: ICMP echo request, id 127, seq 5, length 64
01:33:13.271091 IP 10.10.20.21 > 10.10.20.10: ICMP echo request, id 127, seq 6, length 64
01:33:14.271134 IP 10.10.20.21 > 10.10.20.10: ICMP echo request, id 127, seq 7, length 64
01:33:15.271093 IP 10.10.20.21 > 10.10.20.10: ICMP echo request, id 127, seq 8, length 64
01:33:16.271127 IP 10.10.20.21 > 10.10.20.10: ICMP echo request, id 127, seq 9, length 64
01:33:17.271097 IP 10.10.20.21 > 10.10.20.10: ICMP echo request, id 127, seq 10, length 64
01:33:18.271084 IP 10.10.20.21 > 10.10.20.10: ICMP echo request, id 127, seq 11, length 64
01:33:19.271082 IP 10.10.20.21 > 10.10.20.10: ICMP echo request, id 127, seq 12, length 64
01:33:20.271159 IP 10.10.20.21 > 10.10.20.10: ICMP echo request, id 127, seq 13, length 64
I checked to find any packet was dropped, but no one:
:FORWARD DROP [0:0]
[0:0] -A cali-INPUT -p ipencap -m comment --comment "cali:JhfQUFFJ2v0jbipF" -m comment --comment "Drop IPIP packets from non-Calico hosts" -j DROP
[0:0] -A cali-from-wl-dispatch -m comment --comment "cali:aqepaSa3MXh7Xxam" -m comment --comment "Unknown interface" -j DROP
[0:0] -A cali-from-wl-dispatch-5 -m comment --comment "cali:1VYHDwn-XTXEuBin" -m comment --comment "Unknown interface" -j DROP
[0:0] -A cali-fw-cali0b54a54a96c -m comment --comment "cali:ICqkhxTDsNW_FCNk" -m conntrack --ctstate INVALID -j DROP
[0:0] -A cali-fw-cali0b54a54a96c -m comment --comment "cali:MWiF4UrSv31dAtsb" -m comment --comment "Drop if no profiles matched" -j DROP
[0:0] -A cali-fw-cali5c2866a2deb -m comment --comment "cali:V28oIxWcFdKRBKi6" -m conntrack --ctstate INVALID -j DROP
[0:0] -A cali-fw-cali5c2866a2deb -m comment --comment "cali:KrqzJce7_Mghhckm" -m comment --comment "Drop if no profiles matched" -j DROP
[0:0] -A cali-fw-cali5d7128fa54b -m comment --comment "cali:-aHux0npyzU7m26z" -m conntrack --ctstate INVALID -j DROP
[0:0] -A cali-fw-cali5d7128fa54b -m comment --comment "cali:z7dLDSlTQalBjeUX" -m comment --comment "Drop if no profiles matched" -j DROP
[0:0] -A cali-fw-cali7721a9c82ab -m comment --comment "cali:BKhV-4pkkG7idn-m" -m conntrack --ctstate INVALID -j DROP
[0:0] -A cali-fw-cali7721a9c82ab -m comment --comment "cali:xPbFhkEp6A7tmzfu" -m comment --comment "Drop if no profiles matched" -j DROP
[0:0] -A cali-fw-cali9027171f6c6 -m comment --comment "cali:LHXOFUUurfunNlBZ" -m conntrack --ctstate INVALID -j DROP
[0:0] -A cali-fw-cali9027171f6c6 -m comment --comment "cali:f29xsWB8BN-kefLT" -m comment --comment "Drop if no profiles matched" -j DROP
[0:0] -A cali-fw-calib316fafae20 -m comment --comment "cali:oEbscWabYM2x0BYh" -m conntrack --ctstate INVALID -j DROP
[0:0] -A cali-fw-calib316fafae20 -m comment --comment "cali:dhJVhkipa1mlUC9C" -m comment --comment "Drop if no profiles matched" -j DROP
[0:0] -A cali-to-wl-dispatch -m comment --comment "cali:ASVb8Sm9GP1T6uU5" -m comment --comment "Unknown interface" -j DROP
[0:0] -A cali-to-wl-dispatch-5 -m comment --comment "cali:x-ffYVdO9l0mNu3L" -m comment --comment "Unknown interface" -j DROP
[0:0] -A cali-tw-cali0b54a54a96c -m comment --comment "cali:XqGUdPqFy69Souqs" -m conntrack --ctstate INVALID -j DROP
[0:0] -A cali-tw-cali0b54a54a96c -m comment --comment "cali:evfZPw0dOMI67mgg" -m comment --comment "Drop if no profiles matched" -j DROP
[0:0] -A cali-tw-cali5c2866a2deb -m comment --comment "cali:sCcK0psrCUUtPYcr" -m conntrack --ctstate INVALID -j DROP
[0:0] -A cali-tw-cali5c2866a2deb -m comment --comment "cali:pJ4fz7nU4rYe_cNK" -m comment --comment "Drop if no profiles matched" -j DROP
[0:0] -A cali-tw-cali5d7128fa54b -m comment --comment "cali:XS4zL7fxjly4zB6G" -m conntrack --ctstate INVALID -j DROP
[0:0] -A cali-tw-cali5d7128fa54b -m comment --comment "cali:dToPt6YwgXEBwRJk" -m comment --comment "Drop if no profiles matched" -j DROP
[0:0] -A cali-tw-cali7721a9c82ab -m comment --comment "cali:PtdZjV6UYfXxesy-" -m conntrack --ctstate INVALID -j DROP
[0:0] -A cali-tw-cali7721a9c82ab -m comment --comment "cali:fxn9qzLBmzTNi9Rv" -m comment --comment "Drop if no profiles matched" -j DROP
[0:0] -A cali-tw-cali9027171f6c6 -m comment --comment "cali:nBSSKAQ78rkrzBU4" -m conntrack --ctstate INVALID -j DROP
[0:0] -A cali-tw-cali9027171f6c6 -m comment --comment "cali:1-Jm-vPF2hD6qkDX" -m comment --comment "Drop if no profiles matched" -j DROP
[0:0] -A cali-tw-calib316fafae20 -m comment --comment "cali:gIp-YYm6od0MSODn" -m conntrack --ctstate INVALID -j DROP
[0:0] -A cali-tw-calib316fafae20 -m comment --comment "cali:DO1iA0sgWknpAi_J" -m comment --comment "Drop if no profiles matched" -j DROP
Could you please explain why this happen and how can I get ping between them success?
If you try pinging the other way 10.10.20.10 > 10.10.20.21 do you see the ICMP echo requests if you tcpdump cali5d7128fa54b? (If you haven't done that already, I'm just trying to make sure traffic works both ways.)
yes, I see the ICMP echo requests by tcpdump cali5d7128fa54b when I ping 10.10.20.10 > 10.10.20.21 But, both ways I don't see any reply packet :(
Could you run ip a and ip r inside the container?
Also have you tried pinging from the host to either of the containers?
You could try downgrading to Calico v2.6.2? I'm only suggesting this because of https://github.com/projectcalico/calico/issues/1512
@tmjd I tried commands, both work fine:
root@docker01:~# docker attach my_workload03
/ # ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue qlen 1
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
30: cali0@if31: <BROADCAST,MULTICAST,UP,LOWER_UP,M-DOWN> mtu 1500 qdisc noqueue
link/ether 86:24:00:ce:d2:5d brd ff:ff:ff:ff:ff:ff
inet 192.0.2.103/32 brd 192.0.2.103 scope global cali0
valid_lft forever preferred_lft forever
/ # ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue qlen 1
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
30: cali0@if31: <BROADCAST,MULTICAST,UP,LOWER_UP,M-DOWN> mtu 1500 qdisc noqueue
link/ether 86:24:00:ce:d2:5d brd ff:ff:ff:ff:ff:ff
inet 192.0.2.103/32 brd 192.0.2.103 scope global cali0
valid_lft forever preferred_lft forever
/ # ip r
default via 169.254.1.1 dev cali0
169.254.1.1 dev cali0 scope link
/ #
I also tried ping from the host to containers, I got the same result:
root@docker01:~# ping 192.0.2.103
PING 192.0.2.103 (192.0.2.103) 56(84) bytes of data.
--- 192.0.2.103 ping statistics ---
71 packets transmitted, 0 received, 100% packet loss, time 69999ms
at the same time:
root@docker01:~# tcpdump -i calie215c05df7a
tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
listening on calie215c05df7a, link-type EN10MB (Ethernet), capture size 262144 bytes
14:01:56.517421 IP docker01 > 192.0.2.103: ICMP echo request, id 2596, seq 29, length 64
14:01:57.525470 IP docker01 > 192.0.2.103: ICMP echo request, id 2596, seq 30, length 64
14:01:58.533479 IP docker01 > 192.0.2.103: ICMP echo request, id 2596, seq 31, length 64
14:01:59.541438 IP docker01 > 192.0.2.103: ICMP echo request, id 2596, seq 32, length 64
14:02:00.549378 IP docker01 > 192.0.2.103: ICMP echo request, id 2596, seq 33, length 64
14:02:01.557432 IP docker01 > 192.0.2.103: ICMP echo request, id 2596, seq 34, length 64
14:02:02.565510 IP docker01 > 192.0.2.103: ICMP echo request, id 2596, seq 35, length 64
14:02:03.573501 IP docker01 > 192.0.2.103: ICMP echo request, id 2596, seq 36, length 64
^C
8 packets captured
8 packets received by filter
0 packets dropped by kernel
I aslo get this problem when I try downgrading to Calico v2.6.2.
when I ping from container to the host (in data center), I get reply packet but not shown in output of ping command:
root@docker01:/home/controller# docker attach my_workload02
/ # ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue qlen 1
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
40: cali0@if41: <BROADCAST,MULTICAST,UP,LOWER_UP,M-DOWN> mtu 1500 qdisc noqueue
link/ether da:9b:a6:1d:15:c5 brd ff:ff:ff:ff:ff:ff
inet 192.0.2.102/32 brd 192.0.2.102 scope global cali0
valid_lft forever preferred_lft forever
# ping 192.168.122.45
PING 192.168.122.45 (192.168.122.45): 56 data bytes
^C
--- 192.168.122.45 ping statistics ---
12 packets transmitted, 0 packets received, 100% packet loss
and at vether calif73b54c4622:
root@docker01:~# tcpdump -i calif73b54c4622
tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
listening on calif73b54c4622, link-type EN10MB (Ethernet), capture size 262144 bytes
15:36:17.823026 IP 192.0.2.102 > docker01: ICMP echo request, id 3584, seq 2, length 64
15:36:17.823070 IP docker01 > 192.0.2.102: ICMP echo reply, id 3584, seq 2, length 64
15:36:18.823253 IP 192.0.2.102 > docker01: ICMP echo request, id 3584, seq 3, length 64
15:36:18.823316 IP docker01 > 192.0.2.102: ICMP echo reply, id 3584, seq 3, length 64
15:36:19.823580 IP 192.0.2.102 > docker01: ICMP echo request, id 3584, seq 4, length 64
15:36:19.823664 IP docker01 > 192.0.2.102: ICMP echo reply, id 3584, seq 4, length 64
15:36:20.823828 IP 192.0.2.102 > docker01: ICMP echo request, id 3584, seq 5, length 64
15:36:20.823901 IP docker01 > 192.0.2.102: ICMP echo reply, id 3584, seq 5, length 64
15:36:20.827264 ARP, Request who-has 169.254.1.1 tell 192.0.2.102, length 28
15:36:20.827279 ARP, Reply 169.254.1.1 is-at 32:82:ad:c5:c4:0d (oui Unknown), length 28
15:36:21.824100 IP 192.0.2.102 > docker01: ICMP echo request, id 3584, seq 6, length 64
15:36:21.824166 IP docker01 > 192.0.2.102: ICMP echo reply, id 3584, seq 6, length 64
15:36:22.824399 IP 192.0.2.102 > docker01: ICMP echo request, id 3584, seq 7, length 64
15:36:22.824458 IP docker01 > 192.0.2.102: ICMP echo reply, id 3584, seq 7, length 64
15:36:23.824561 IP 192.0.2.102 > docker01: ICMP echo request, id 3584, seq 8, length 64
15:36:23.824603 IP docker01 > 192.0.2.102: ICMP echo reply, id 3584, seq 8, length 64
15:36:24.824816 IP 192.0.2.102 > docker01: ICMP echo request, id 3584, seq 9, length 64
15:36:24.824886 IP docker01 > 192.0.2.102: ICMP echo reply, id 3584, seq 9, length 64
Could you please explain why I don't see any output from ping command? is this because of calico?
I'm not sure why that would be. If you are seeing the traffic on the interface then it should be in the container, there is no filtering (that I'm aware of) in the container. Could you try running an nginx container or run a container with nc/netcat and try a TCP connection instead of ICMP traffic? I don't have any reasoning to expect a difference but it may be interesting to see if there is a difference there,
I just installed with following basic commands. It's so basic, so I don't know why I got this bug:
- Install docker.
- Add
--cluster-storeto docker service file and restart daemon. - set prefix calico interface for container created by this docker host.
etcdctl set /calico/v1/host/<docker host>/config/InterfacePrefix cali
- Download and change mode for calicoctl:
sudo wget -O /usr/local/bin/calicoctl https://github.com/projectcalico/calicoctl/releases/download/v1.6.3/calicoctl
sudo chmod +x /usr/local/bin/calicoctl
- Run calico node:
ETCD_ENDPOINTS=http://${NODE_IP}:2379 calicoctl node run --no-default-ippools --ip=${NODE_IP} --node-image=quay.io/calico/node:v2.6.8
When calico node run correctly. I created one ip pool:
# cat << EOF | calicoctl create -f -
- apiVersion: v1
kind: ipPool
metadata:
cidr: 192.0.2.0/24
EOF
and then, I created a network with above pool:
# docker network create --driver calico --ipam-driver calico-ipam --subnet=192.0.2.0/24 my_net
and created containers:
# docker run --net my_net --name my_workload2 --ip 192.0.2.2 -tid busybox
# docker run --net my_net --name my_workload3 --ip 192.0.2.3 -tid busybox
That's all my basic commands I did. please take a look, and tell me if any command wrong? thanks so much.
One thing that looks odd to me is that you set the InterfacePrefix for calico. Did you find that was needed? because it looks like what you've set should be the default. TBH I didn't know that was an option to change.
Did you try as I suggested and try netcat or nginx as your container? If the ping traffic is making it to the cali interface then it is in the container so at that point I don't know what could be wrong. You show that you're using busybox and that is not a problem I've seen before with that image.
Anyone else got ideas?
@tmjd thanks for your help, I found this is a bug with docker 18.x everything will ok with docker 17.12.
@huynhducbk95 I would be very interested to know exactly what is that Docker 18.x issue, as I'm facing the problem. Thanks!
@wegel I don't know exactly what version used, but I just downgrade to 17.12.1~ce-0~ubuntu
I was facing the exact same issue that @huynhducbk95 and the problem was solved after downgrading from docker 18.03.1-ce to 17.03.2-ce. If someone knows whats going on with Docker 18.x, that would be great!
I was facing the exact same issue that @huynhducbk95 and the problem was solved after downgrading from docker 18.03.1-ce to 17.03.2-ce. If someone knows whats going on with Docker 18.x, that would be great!
thx, I never thought about docker, but the problem was solved after restart docker.
docker version
docker version
Client:
Version: 18.09.9
API version: 1.39
Go version: go1.11.13
Git commit: 039a7df
Built: Wed Sep 4 16:54:32 2019
OS/Arch: linux/arm64
Experimental: false
Server: Docker Engine - Community
Engine:
Version: 18.09.9
API version: 1.39 (minimum version 1.12)
Go version: go1.11.13
Git commit: 039a7df
Built: Wed Sep 4 16:25:05 2019
OS/Arch: linux/arm64
Experimental: false
