WirelessPrinting icon indicating copy to clipboard operation
WirelessPrinting copied to clipboard
verified publisher icon probonopd

Don't print in Artillery genius pro

Open aacorvalan opened this issue 3 years ago • 5 comments

Hello, in artillery genius it can be connected to the Tx and Rx of the TFT? because I have it connected and it does not print Captura de pantalla 2022-05-20 02:45:20 Captura de pantalla 2022-05-20 02:46:41

aacorvalan avatar May 20 '22 05:05 aacorvalan

Which firmware is the Artillery Genius Pro using? Marlin? Which version?

probonopd avatar May 20 '22 06:05 probonopd

What do you see if you connect via Telnet?

probonopd avatar May 20 '22 06:05 probonopd

The latest updates of TFT and Marlin. Telnet with what command? 20220520_131337 Captura de pantalla 2022-05-20 13:23:45 Captura de pantalla 2022-05-20 13:15:10

aacorvalan avatar May 20 '22 16:05 aacorvalan

You do not need to specify a port to telnet, it will work with just the IP address.

But there is no communication going on between the printer and the module according to the empty telnet screen. Hence please triple check your wiring. TX on the ESP must go to RX on the printer and vice versa.

probonopd avatar May 21 '22 05:05 probonopd

I cross-connected Tx and Rx on the TFT, supposedly they are connected in parallel with the motherboard, with ESPcam and with Nodemcu. With Esp3d I can move motors but not transfer Gcode, that is, the communication worked, I don't know why in this case it didn't

aacorvalan avatar May 25 '22 02:05 aacorvalan