privatecoder
privatecoder
found it
what a pain to set-up ruby 2.7 on macOS and adjusting all paths.. "unfortunately" the gem **works fine** (i.e. doesn't throw the error about ed25519) @vitobotta
Well, you could just go ahead and re-enable metrics-server by removing the `--disable metrics-server` in the masters `k3s.service`. Also Rancher uses `metrics-server` to display node-metrics in the overview.. I would...
+1 for `masterLoadBalancerServiceAnnotations` and `replicaLoadBalancerServiceAnnotations`
just leave it at `1` for all your inverters and add them regularly, however you need to _fix_ the inverter definition if you hit the [`-100` _degree battery-temp issue_](https://github.com/StephanJoubert/home_assistant_solarman/issues/181#issuecomment-1802120189)
@deuko you can modify the inverter-definition and remove `invalidate_all:`-line in the battery temperature part (for example via the File Editor): ``` - name: "Battery Temperature" class: "temperature" state_class: "measurement" uom:...
you could access the slaves via RS485 directly from the free master's or the last slaves-RS485 port **and** use a second RS485 connection on the CAN-port of the master using...
Maybe you got me wrong too: You can use the CAN-Port using a splitter (https://www.amazon.de/dp/B00D3KIQXC/) to connect the CAN-part to the inverter and read the _battery-stuff_ via RS485 **simultaneously** –...
I did not check the title – mine is not v3 but the previous version 10E. Have you tried with the baud-rate set to 9600? This works on the 10E...