printercnc

i tried with latest marlin bugfix 2.1.x, it works great. Your tcpc branch has many errors, in addition to the g2/g3 migration error, there is also the problem of declaring...

yes, I use the Marlin2ForPipetBot branch, which is the branch with tcpc kinematics 

These are the 3 files I have edited in there, In the pin ramps file, I edited the endstop part to add home points for axis a and c [FILE_CONFIG.zip](https://github.com/DerAndere1/Marlin/files/15071461/FILE_CONFIG.zip)

two weeks ago, did you edit this issue, I don't know if it has anything to do with this g2/g3 x y z i j f move syntax (eg G3...

I downloaded your latest fix, compiled it, no more errors appear at the moment. I will test it on my cnc router. I plan to make a handle through the...

[PI3_chess-king.zip](https://github.com/DerAndere1/Marlin/files/15091342/PI3_chess-king.zip) This is the gcode sample I used to test the g2/g3 command. on the marlin_bgfix2.1.x branch works perfectly fine. On the Marlin2ForPipetBot tcpc branch they move but very slowly....

[video.zip](https://github.com/DerAndere1/Marlin/files/15096129/video.zip) When the axes move, the g0/g1 commands move very smoothly. When the g3 command comes to interpolate the arc, the two x y axes move slowly. I like your...

Am I annoying you by asking too many questions? I discovered an error that I cannot use g38 in the adv.h file if I use tcpc kinematics. I love your...

I just recompiled, and am excited to test this g2/g3 fix. We'll come back to this g38 topic once we're done with the g2/g3 fix. I will need some time...

  The error is still not fixed, I took two pictures Web comparisons and latest downloads. I'm confused and not sure if the download has to be updated.