hyperpixel4
hyperpixel4 copied to clipboard
pimoroni
Driver for the Pimoroni HyperPixel 4.0" Touchscreen Display
trying the approaches listed here in issue 208: https://github.com/pimoroni/hyperpixel4/issues/208 and https://github.com/pimoroni/hyperpixel4/issues/177#issuecomment-1837186505 i still did not manage to get the screen to work with the Pi 5 in combination with the...
Using the hyperpixel4 square. Whenever i add the line as mentioned in issue 177, `dtoverlay=vc4-kms-dpi-hyperpixel4` and reboot, i first see the raspberry pi icon in that white square showing up...
Hi all, I understand that 64-bit Ubuntu Server is not supported, but just wanted to understand if it is possible to fix the issue below. I installed hyperpixel4 -b 64bit-beta...
:information_source: See this comment for rotation in Raspberry Pi Desktop screen configuration - https://github.com/pimoroni/hyperpixel4/issues/177#issuecomment-1786957639 :warning: PSA: Make sure you disable i2c, SPI and any other interfaces since these will cause...
When the Raspberry Pi is shutdown, but still connected to power, the backlight remains on. Is this behaviour configurable? Or should it be possible to toggle the backlight off by...
**Describe the bug** Hyperpixel 4 not displaying image on Raspberry Pi 400 - either displays backlight only or displays white screen and then backlight only. **To Reproduce** I have attempted...
How do you rotate the touch? I need to invert the screen but the touch still follows the "upside down" method in desktop. I have pi 5 running 64 bit...
After adding the suggested lines ``` dtoverlay=vc4-kms-dpi-hyperpixel4 dtparam=rotate=90 ``` in the /boot/config.txt and configuring the screen setup with wdisplay | Screen Configuration (ARandR) I have the hyperpixel4 properly working alongside...
Raspberry pi 3B Arch for ARM (up to date) Can't get it to work on a non-raspiOS OS, however I've seen people having reportedly used the hyperpixel 4.0 using Arch...
I'm firing up two new servers and the current method of install instruction just doesn't work for me. In the terminal it absolutely works as expected. In X I can't...