Peter
Peter
I have the same problem, I want to force the fan to stay on irregardless of the temperature. When I turn the switch on, the fan starts on full speed...
Ahh, after a reboot am seeing: ``` Apr 18 00:35:57 pi-main root[3429]: pa-suspend.sh (Container Start): Failed to change PA parameters in hassio_audio (sed: /run/s6/services/pulseaudio/run: No such file or directory) ```
But lets say I want to extract a section from a backup, and import into the live config can that be done ?
I have a similar issue running on proxmox. It was working fine on proxmox V7 for 2+ years, I then upgraded to V8 2 days ago and are getting the...
and this is the usb info: ``` # lsusb -vd 0463:ffff Bus 003 Device 002: ID 0463:ffff MGE UPS Systems UPS Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass...
@jimklimov - Thanks no already checked if it was being used by something else when I saw one of the comments above. `lsof /dev/bus/usb/003/002` produces no output so nothing else...
well I don't know why as I have rebooted several times, but I just rebooted and its all back to normal now. Obviously something I did resolved it, but sadly...
thanks so much, shipping costs are always a problem, so enclosures are not a good idea, I have lots in my stock. Do you have a V1.5 board with RAK831...
Thanks so much. What is JLPCB link ?
but if you have a board with RAK831 then it would save me ordering from 2 sources.