How to generate .mat files?

[LightRay2]

Hello! I tried to reproduce .mat files for test models, but didn't succeded. 10 num bins + radius 9 are correct for SHOT? Radius 9 is applied as the percent of the area?

Best regards, Michael.

[orlitany]

Hi, I'll have to find the parameters i used. In the meanwhile, here's a link to the data

[LightRay2]

For those who faced the same problem: .off file coordinates should be premultiplied by 100 before calculating SHOT.

A brief test runs on provided model: quite well for FAUST and SCAPE, but nearly random for TOSCA. Is it expected or possibly i'm doing something wrong (of course, no premultiplication for TOSCA, it's already in sentimeters)?

[orlitany]

the provided model was supposed to serve as a mock. I'll try to upload one that has been trained longer. For Tosca (dogs) we used a pretrained model (on faust) and refined it on several tosca pairs.

On Sun, May 27, 2018, 01:58 LightRay2 [email protected] wrote:

For those who faced the same problem: .off file coordinates should be premultiplied by 100 before calculating SHOT.

A brief test runs on provided model: quite well for FAUST and SCAPE, but nearly random for TOSCA. Is it expected or possibly i'm doing something wrong (of course, no premultiplication for TOSCA, it's already in sentimeters)?

— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/orlitany/DeepFunctionalMaps/issues/3#issuecomment-392293194, or mute the thread https://github.com/notifications/unsubscribe-auth/AEuHZqV8ZHjlzJGzA_5O1aAIGlX_k-phks5t2d4vgaJpZM4T3Yl8 .

[GitHubforXiaoming]

Hello! part_evecs: eigenvectors on source shape part_evecs_trans: transposed part_evecs with mass matrix correction model_evecs: eigenvectors on target shape model_evecs_trans: transposed model_evecs with mass matrix correction I want to obtain these value from other models. Can you explain more about it since these defines are not clear for me ?

Best regards. Xiaoming.

[hellohawaii]

Hello! I tried to reproduce .mat files for test models, but didn't succeded. 10 num bins + radius 9 are correct for SHOT? Radius 9 is applied as the percent of the area?

Best regards, Michael.

I am trying to compute the SHOT descriptors, too! May I ask what value I should assign to the key 'min_neighs' to get the same .mat file?

[orlitany]

Added a description of SHOT parameters and the calc_shot function to a Utils folder.

[Adamwgoh]

Hi, I noticed that the results calculated using the provided calc_shot matlab binary do not produce the same results at the ones provided. Because of that, I had not been able to reproduce the results of the sample mesh, let alone other FAUST models (using the given pre-trained model). Is it possible the sample data's SHOT is not calculated with the same way?

If it is, is there a way to provide the rest of the header and .cpp code necessary for us to compile one that is not tied to Matlab?

[rFalque]

@orlitany can you add the shot_descriptor.cpp and shot_descriptor.h as well?

[orlitany]

calc_shot.cpp is in Utils... alternatively you can write prof. Tombari as described on the project webpage: http://www.vision.deis.unibo.it/research/80-shot

[orlitany]

Hi, I noticed that the results calculated using the provided calc_shot matlab binary do not produce the same results at the ones provided. Because of that, I had not been able to reproduce the results of the sample mesh, let alone other FAUST models (using the given pre-trained model). Is it possible the sample data's SHOT is not calculated with the same way?

If it is, is there a way to provide the rest of the header and .cpp code necessary for us to compile one that is not tied to Matlab?

perhaps it's a scale issue. I think others have commented on this already, try scaling the models by a factor of 100

[rFalque]

There are some missing files related to the includes of the calc_shot.cpp #include "shot_descriptor.h"

I guess, the tools used are the same as the toolbox used there https://github.com/zorah/KernelMatching/blob/cb79b080abcb87a42ec01cac383751e342805e99/tools/shot/shot_descriptor.cpp

[orlitany]

There are some missing files related to the includes of the calc_shot.cpp #include "shot_descriptor.h"

I guess, the tools used are the same as the toolbox used there https://github.com/zorah/KernelMatching/blob/cb79b080abcb87a42ec01cac383751e342805e99/tools/shot/shot_descriptor.cpp

Yes, we used the same tools i that work. Thanks for pointing this out!

[shixue-qing]

Hello, I am a student and I have read a paper you published in 2017 called Deep Function Mapping. I want to know what the.cpp file is used for. I want to run it and find that it has no main function and no function that needs to be called inside.Also, I would like to know how Figure 7 came out?I really need the code of Figure 7, and I hope you can send it to me.Thanks a million.

[shixue-qing]

Hello, I need your Shrec '16 data set, I hope you can send it to me, thank you very much.

[orlitany]

try to follow the code here: https://github.com/OshriHalimi/unsupervised_learning_of_dense_shape_correspondence Oshri did a better job maintaining this repo and the difference between the methods is in the loss function so you could easily swap those.