BK7231GUIFlashTool
BK7231GUIFlashTool copied to clipboard
Easy to use, GUI, BK7231T/BK7231N flash tool and GPIO config extractor for beginners. Dedicated for Windows platform, but works on Linux with Mono. This tool can automatically download latest firmwar...
Will it flash Beken BK7238 SoC?
for a fw backup to be visible in the drop-down list for flashing file name needs to match "readResult_BK7231N_QIO_*.bin" pattern. renaming file is easy enough, but it'd be better to...
Hi, [this](https://www.elektroda.com/rtvforum/topic4045465.html) was the second unit which had a 100nF capacitor on a transmission line. If BK7231GUIFlashTool would allow us to select lower baud rates, we could read the FW...
Hi. I'm trying to backup the firmware in my BK7231N device (the Wi-Fi switch with CB2S module). I have soldered 5 wires - GND, VCC, RX, TX, CEN. I have...
### Problem to solve When opening version 1.1.6, the Select firmware dropdown defaults to the oldest firware which has been downloaded, so before flashing a new device, I need to...
From the description > flash the OpenBK firmware to Beken chipset (BK7231T or BK7231N) based devices Is it like at [openshwprojects/OpenBK7231T_App#readme](https://github.com/openshwprojects/OpenBK7231T_App?tab=readme-ov-file#flashing) where the repo has the name of this devices...
Flasher mode: BK7231N Going to open port: COM3. Serial port open! Getting bus... (now, please do reboot by CEN or by power off/on) Getting bus failed, will try again -...
Hi there, I'm trying to use it in Linux, but I'm having trouble to compile it. Is it compatible with Linux?
Hello, I ordered two WB2-12F development boards, hoping I would be able to flash them with OpenBeken. This is the board: https://de.aliexpress.com/item/1005004911487557.html Unfortunately I did not yet manage to get...
Hello, BK7231N (CB3S) chip I can't do flasch or backup. Whichever I do. In the HID Download itself goes without the slightest problem. ``` Starting read! Now is: piątek, 6...