openconfig
Rt 2.13 revision
Replacing cli cisco command with apply-weight ecmp-only bandwidth to do auto wecmp. Moving the code that shuts down the interface to after the flows are created and sent to otg since that function pushes the whole configuration to the otg, making all the interfaces to be up.
Pull Request Functional Test Report for #3328 / 6242ff26726881cfc951bf148190a643b0814343
Virtual Devices
| Device | Test | Test Documentation | Job | Raw Log |
|---|---|---|---|---|
| Arista cEOS |  |
RT-2.13: Weighted-ECMP for IS-IS |
||
| Cisco 8000E |  |
RT-2.13: Weighted-ECMP for IS-IS |
||
| Cisco XRd |  |
RT-2.13: Weighted-ECMP for IS-IS |
||
| Juniper ncPTX |  |
RT-2.13: Weighted-ECMP for IS-IS |
||
| Nokia SR Linux |  |
RT-2.13: Weighted-ECMP for IS-IS |
||
| Openconfig Lemming |  |
RT-2.13: Weighted-ECMP for IS-IS |
Hardware Devices
| Device | Test | Test Documentation | Raw Log |
|---|---|---|---|
| Arista 7808 |  |
RT-2.13: Weighted-ECMP for IS-IS |
|
| Cisco 8808 |  |
RT-2.13: Weighted-ECMP for IS-IS |
Log |
| Juniper PTX10008 |  |
RT-2.13: Weighted-ECMP for IS-IS |
|
| Nokia 7250 IXR-10e |  |
RT-2.13: Weighted-ECMP for IS-IS |
Pull Request Test Coverage Report for Build 12130197664
Details
- 0 of 0 changed or added relevant lines in 0 files are covered.
- No unchanged relevant lines lost coverage.
- Overall coverage remained the same at 55.268%
| Totals | |
|---|---|
| Change from base Build 12110313926: | 0.0% |
| Covered Lines: | 1983 |
| Relevant Lines: | 3588 |
💛 - Coveralls
@fmolinar this test with the changes shows failing on Cisco virtual platforms. Is that expected?
This test fails communicating with OTG/ATE. Can you please investigate?
See: https://gist.github.com/dplore/e23db5b6d86c7913779013412104a9a6
This test fails communicating with OTG/ATE. Can you please investigate?
See: https://gist.github.com/dplore/e23db5b6d86c7913779013412104a9a6
Can you retry with Ixia-C/Keng-Controller version 1.17.0-9? I had raised an issue with Keysight in lines with Static LAGs not resolving ARP. Also Keysight raised a PR to change this test via https://github.com/openconfig/featureprofiles/pull/3316
