cangaroo icon indicating copy to clipboard operation
cangaroo copied to clipboard

Open source can bus analyzer software - with support for CANable / CANable2, CANFD, and other new features

Results 25 cangaroo issues
Sort by recently updated
recently updated
newest added

When i import the project and build it i have a problem with libnl-3 package miss Can you help me please?

In Ubuntu 23.10 (And some versions before too), there's no `qt5-default`. So, building fails on `qmake -qt=qt5`. Are there any known workarounds?

Thanks for taking care of the project! I have a question concerning the install prefix. Where is it defined? Common search results for `qmake` state it could be set using...

I try to build it in deepin 20.9,but some wrong :-1: error: Project ERROR: libnl-3.0 development package not found what should i do?

I use the Candlelight firmware for USB to CAN conversion and the Cangaroo software on Windows 10, but Cangaroo cannot find the CAN tool. ![image](https://github.com/normaldotcom/cangaroo/assets/9926722/9459715e-5476-4fcb-a28b-8001d9b983bd) ![image](https://github.com/normaldotcom/cangaroo/assets/9926722/af30a745-8f70-4438-83d2-45d5dd6ffd64)

Cangaroo output: ![image](https://github.com/normaldotcom/cangaroo/assets/146840909/0004ade1-75a5-483c-bcb0-7936f5088d70) Vector CANalyzer output: ![image](https://github.com/normaldotcom/cangaroo/assets/146840909/37c7993d-2f86-4300-87b4-19d0da6a1a89) .dbc file: ```BO_ 2030 HeartbeatMsg: 6 Vector__XXX SG_ HeartbeatSigSingle : 16|32@1- (1,0) [0|0] "" Vector__XXX SG_ HeartbeatSigDec : 8|8@1+ (1,0) [0|255] "" Vector__XXX...

This has two fixes, to enable canable to work with the Nissan Leaf DBC files [published here](https://github.com/dalathegreat/leaf_can_bus_messages). 1. Tokens weren't allowed to start with 'J' - I have not checked...

I didn't look into or change anything relating to little endian parsing, but I've tested this change with Big Endian signals in a DBC and it works now

My device sends extended CANID packets. Protocol SLCAN. "Aggregate by ID" by default is on. 1. I switch it off. Trace view works ok. 2. I switch it on. Trace...

Hello , I 'm trying to install at Ubuntu 20.04 ```qmake -qt=qt5``` was fine ```make``` didn't work here is error message ``` driver/SocketCanDriver/SocketCanInterface.cpp:411:6: error: no declaration matches ‘bool SocketCanInterface::readMessage(CanMessage&, unsigned...