niceboygithub
Switch is not available
I have five S1E devices. Two of them have been successfully connected to MQTT and are functioning normally. However, two of the relay switches are showing an "unavailable" status, as shown in the picture. Additionally, one of the devices failed to be added properly.
Previously, all five switches had been connected to MQTT, and at that time, all the relay switches were displaying an "unavailable" status. Interestingly, two of the switches later unexpectedly returned to a normal state under unknown circumstances.
What are the versions of S1E and S1E2HA?
Both S1E and S1E2HA are updated to the latest according to the project. These are all recent operations. If you're referring to versions with multiple iterations of hardware, I'm not sure. I bought it in August 2023.
hello ,@niceboygithub
Through the 'top' command in telnet, I have found that the two processes: ha_driven -O1 -L7 ha_driven -O 1 -L 7 -p /tmp/automatic.pid
are consistently consuming a total of 20% of the memory when using the problematic switches. The switches that are working normally do not exhibit similar memory usage.
I recall that I used the ”gw_global_tool.ttl“ to remove the password and flash the firmware. I did not go through the interrupt uboot process. Will this have any impact?
hi, @niceboygithub
This is the state after running the top command.
Mem: 41512K used, 15348K free, 0K shrd, 857416K buff, 857464K cached CPU: 0.0% usr 4.5% sys 0.0% nic 95.4% idle 0.0% io 0.0% irq 0.0% sirq Load average: 6.04 6.06 6.00 1/110 3042 PID PPID USER STAT VSZ %VSZ CPU %CPU COMMAND 814 1 root S 13740 24.1 1 4.5 /bin/aqgui -F /res -l d 802 1 root S 11396 20.0 0 0.0 ha_master -H -S -a /lib/libha_auto.so 799 1 root S 5680 9.9 0 0.0 ha_lanbox 3202 1 root S 5452 9.5 1 0.0 wpa_supplicant -D nl80211 -i wlan0 -c /tmp/wpa_supplicant.conf -B -W 956 846 root S 4800 8.4 1 0.0 ha_driven -O 1 -L 7 -p /tmp/automatic.pid 798 1 root S 4184 7.3 0 0.0 ha_basis 796 1 root S 3852 6.7 1 0.0 ha_agent -D 756 1 root S 3088 5.4 1 0.0 /bin/sysservice -l d 958 846 root S 2576 4.5 1 0.0 {res_monitor.sh} /bin/sh /data/bin/res_monitor.sh 846 1 root S 2576 4.5 1 0.0 {res_monitor.sh} /bin/sh /data/bin/res_monitor.sh 758 1 root S 2568 4.5 1 0.0 telnetd 1 0 root S 2452 4.3 1 0.0 {linuxrc} init 2961 1 root S 2452 4.3 1 0.0 -/bin/login 3148 846 root S 2448 4.3 0 0.0 {app_monitor.sh} /bin/sh /tmp/app_monitor.sh 815 1 root S 2448 4.3 0 0.0 {gui_monitor.sh} /bin/sh /bin/gui_monitor.sh 805 1 root S 2448 4.3 1 0.0 {Aries.sh} /bin/sh /bin/Aries.sh 1199 845 root S 2448 4.3 1 0.0 {ubus_monitor.sh} /bin/sh /data/bin/ubus_monitor.sh 1146 844 root S 2448 4.3 0 0.0 {mqtt_sub.sh} /bin/sh /data/bin/mqtt_sub.sh 957 846 root S 2448 4.3 1 0.0 awk /method|sendHeartbeat {print $7 $8} 1197 845 root S 2448 4.3 1 0.0 awk {$1=$2=$3=$4=" ; print $0} 844 1 root S 2448 4.3 0 0.0 {mqtt_sub.sh} /bin/sh /data/bin/mqtt_sub.sh 845 1 root S 2448 4.3 1 0.0 {ubus_monitor.sh} /bin/sh /data/bin/ubus_monitor.sh 3042 3024 root R 2448 4.3 1 0.0 top 3024 758 root S 2448 4.3 1 0.0 -sh 3243 1 root S 2448 4.3 1 0.0 udhcpc -i wlan0 -s /etc/udhcp/simple.script -x hostname Magic-Switch-S1E-4E00 -t 10 3026 815 root S 2316 4.0 0 0.0 sleep 5 3028 3148 root S 2316 4.0 0 0.0 sleep 5 3041 805 root S 2316 4.0 1 0.0 sleep 10 792 1 root S 2296 4.0 1 0.0 mdnsd 739 1 root S 2236 3.9 0 0.0 /bin/fwfs --block_size=131072 --subblock_size=32768 --block_cycles=500 --read_size=2048 --prog_size=2048 --cache_size=32768 --file_cache_size=32768 --cache_pool_size=2 --block_count=8 --lookahead_size=8 /dev/mtd10 /misc 744 1 root S 1784 3.1 1 0.0 ubusd 1196 845 root S 1752 3.0 1 0.0 ubus -v monitor 1145 844 root S 1592 2.8 0 0.0 /bin/mosquitto_sub -h 192.168.10.132 -u mqtt -P 123456 -p 1883 -v -t homeassistant/+/0x0054ef44534e00/# -t homeassistant/status 749 1 root S 1456 2.5 1 0.0 property_service -i /etc/build.prop -p /data/storage/prop.dat -b 740 1 root S 1376 2.4 0 0.0 watchdog_30S 564 2 root SW 0 0.0 1 0.0 [kworker/1:1] 617 2 root SW 0 0.0 1 0.0 [ksdioirqd/mmc0] 255 2 root SW 0 0.0 0 0.0 [kworker/0:1] 1111 2 root DW 0 0.0 0 0.0 [disp0_P0_MAIN] 1114 2 root DW 0 0.0 0 0.0 [MI_FB_SYNC_DISP] 670 2 root SW 0 0.0 0 0.0 [bl_wdog/mmc0:00] 657 2 root DWN 0 0.0 1 0.0 [mi_log] 3014 2 root SW 0 0.0 0 0.0 [kworker/0:0] 7 2 root SW 0 0.0 0 0.0 [rcu_preempt] 1934 2 root SW< 0 0.0 0 0.0 [kworker/u5:1] 22 2 root SW 0 0.0 1 0.0 [kworker/u4:1] 3227 2 root SW< 0 0.0 1 0.0 [kworker/u5:0] 3 2 root SW 0 0.0 0 0.0 [ksoftirqd/0] 16 2 root SW 0 0.0 1 0.0 [migration/1] 2556 2 root SW< 0 0.0 1 0.0 [kworker/u5:2] 17 2 root SW 0 0.0 1 0.0 [ksoftirqd/1] 10 2 root SW 0 0.0 0 0.0 [migration/0] 491 2 root SW 0 0.0 1 0.0 [monitor_temp] 354 2 root SW 0 0.0 0 0.0 [kswapd0] 214 2 root SW 0 0.0 1 0.0 [kcompactd0] 731 2 root SW 0 0.0 1 0.0 [ubi_bgt1d] 1959 2 root SW 0 0.0 1 0.0 [kworker/u4:2] 12 2 root SW 0 0.0 0 0.0 [watchdog/0] 20 2 root SW 0 0.0 1 0.0 [kdevtmpfs] 622 2 root DW 0 0.0 1 0.0 [IspDriverThread] 626 2 root DW 0 0.0 0 0.0 [IspMidThreadWq] 654 2 root SW 0 0.0 0 0.0 [mi_wq] 2 0 root SW 0 0.0 0 0.0 [kthreadd] 5 2 root SW< 0 0.0 0 0.0 [kworker/0:0H]
試試這個
謝謝，照你的方式已可成功控制切換其他選項主題或字體這還是不可用，有方法修改嗎
嘗試我的 repo，我已經修復了這個問題：這個
I try , but still have problem
Not s1e_update.sh, use install_s1e2ha.sh this script
試試這個
謝謝，照你的方式已可成功控制切換其他選項主題或字體這還是不可用，有方法修改嗎
嘗試我的 repo，我已經修復了這個問題：這個
I try , but still have problem
Not s1e_update.sh, use install_s1e2ha.sh this script
thx bro , it can work.
試試這個
謝謝，照你的方式已可成功控制開關 其他選項主題或者字體這還是不可用，有方法修改嗎
try my repo, I have fixed this problem: this
Thank you, all entities available with your repo. However, sometimes the switch can't read with correct status especially quick on and off in few seconds, or can't send MQTT command to S1E, switch back to previous status and no MQTT logs about that. In my case, need to wait about 10s then send MQTT command to S1E and it will get work.
