nut
nut copied to clipboard
networkupstools
Salicru SLC 3000 Twin RT2 not supported by usbhid-ups
My setup:
- OS: Linux 4.18.0-305.3.1.el8 x86_64 GNU/Linux CentOS Linux release 8.4.2105
- UPS: Salicru SLC 3000 Twin RT2 (2e66:0102)
- NUT: Just downloaded from github + libusbx-1.0.23-4
Network UPS Tools - UPS driver controller 2.8.0-98-g3744cb047
Network UPS Tools - Generic HID driver 0.48 (2.8.0-98-g3744cb047)
USB communication driver (libusb 1.0) 0.43
Using subdriver: Salicru HID 0.3
Note: I've added this to drivers/salicru-hid.c, but it made no difference:
{ USB_DEVICE(SALICRU_VENDORID, 0x0102), NULL }, - Relevant info from "udevadm info --attribute-walk --name=/dev/usb/hiddev1":
ATTRS{serial}=="0000000000000000"
ATTRS{manufacturer}=="Salicru"
ATTRS{product}=="TWIN3000-R"
ATTRS{serial}=="0000:00:14.0"
ATTRS{manufacturer}=="Linux 3.10.0-1062.1.1.el7.x86_64 xhci-hcd"
ATTRS{product}=="xHCI Host Controller"
- ups.conf
[upsslc]
driver=usbhid-ups
port=auto
vendorid=2e66
productid=0102
desc = "Salicru SLC 3000 Twin RT2"
Output from "upsc":
device.mfr: Salicru
device.model: TWIN3000-R
device.serial: 0000000000000000
device.type: ups
driver.name: usbhid-ups
driver.parameter.pollfreq: 30
driver.parameter.pollinterval: 2
driver.parameter.port: auto
driver.parameter.productid: 0102
driver.parameter.synchronous: auto
driver.parameter.vendorid: 2e66
driver.version: 2.8.0-98-g3744cb047
driver.version.data: Salicru HID 0.3
driver.version.internal: 0.48
driver.version.usb: libusb-1.0.23 (API: 0x1000107)
ups.mfr: Salicru
ups.model: TWIN3000-R
ups.productid: 0102
ups.serial: 0000000000000000
ups.status: OB
ups.vendorid: 2e66
Output from "/usr/local/ups/bin/usbhid-ups -D -u root -a upsslc":
Network UPS Tools - Generic HID driver 0.48 (2.8.0-98-g3744cb047)
USB communication driver (libusb 1.0) 0.43
0.000000 [D1] Built-in default or configured user for drivers 'nut' was ignored due to 'root' specified on command line
0.000086 [D1] debug level is '1'
0.001301 [D1] upsdrv_initups (non-SHUT)...
0.006268 Using subdriver: Salicru HID 0.3
0.006292 [D1] 2 HID objects found
0.006487 nut_libusb_get_report: Success
0.006509 [D1] Can't retrieve Report 00: Resource temporarily unavailable
0.006534 [D1] Path: ff000001.ff000002, Type: Input, ReportID: 0x00, Offset: 0, Size: 8
0.006739 nut_libusb_get_report: Success
0.006744 [D1] Can't retrieve Report 00: Resource temporarily unavailable
0.006750 [D1] Path: ff000001.ff000002, Type: Output, ReportID: 0x00, Offset: 0, Size: 8
0.006764 [D1] Detected a UPS: Salicru/TWIN3000-R
0.006850 [D1] upsdrv_initinfo...
0.006857 [D1] upsdrv_updateinfo...
0.757015 [D1] Got 0 HID objects...
0.757048 [D1] Quick update...
0.757231 [D1] Group and/or user account for this driver was customized ('root:nut') compared to built-in defaults. Fixing socket '/var/state/ups/usbhid-ups-upsslc' ownership/access.
0.757248 [D1] Group access for this driver successfully fixed
0.757262 [D1] upsdrv_updateinfo...
1.507501 [D1] Got 0 HID objects...
1.507532 [D1] Quick update...
2.758609 [D1] upsdrv_updateinfo...
3.508807 [D1] Got 0 HID objects...
3.508837 [D1] Quick update...
As you can see, it stucks in a loop, getting 0 HID objects. If I increase the debug level...
0.757823 [D1] upsdrv_updateinfo...
1.508007 [D2] nut_libusb_get_interrupt: Connection timed out
1.508018 [D1] Got 0 HID objects...
1.508024 [D1] Quick update...
2.759135 [D1] upsdrv_updateinfo...
3.509375 [D2] nut_libusb_get_interrupt: Connection timed out
3.509392 [D1] Got 0 HID objects...
3.509396 [D1] Quick update...
upsrw and upscmd -l both return nothing...
Interesting... seems like some usb layer issue; try the option for "pollonly" (iirc the name) to avoid interrupts. Some systems seem to only work with one or the other method.
Ok, I've tried with pollonly = "enabled" and log does show different output. But it can't get data back either:
0.001932 Connected to UPS [upsslc]: usbhid-ups-upsslc
0.002428 Running as foreground process, not saving a PID file
0.002443 [D2] mainloop: polling 3 filedescriptors
0.002480 [D2] mainloop: polling 3 filedescriptors
0.002504 [D3] UPS [upsslc]: dump is done
0.002511 [D2] mainloop: polling 3 filedescriptors
2.004628 [D2] mainloop: no data available
2.004669 [D2] mainloop: polling 3 filedescriptors
4.006768 [D2] mainloop: no data available
4.006814 [D2] mainloop: polling 3 filedescriptors
6.008920 [D2] mainloop: no data available
6.009000 [D3] Pinging UPS [upsslc]
6.009049 [D2] mainloop: polling 3 filedescriptors
6.009134 [D3] Got PONG from UPS [upsslc]
6.009160 [D2] mainloop: polling 3 filedescriptors
8.011289 [D2] mainloop: no data available
sudo /usr/local/ups/bin/usbhid-ups -D -u root -x pollonly -a upsslc
0.000000 [D1] Built-in default or configured user for drivers 'nut' was ignored due to 'root' specified on command line
0.000096 [D1] debug level is '1'
0.001306 [D1] upsdrv_initups (non-SHUT)...
0.004966 [D1] nut_libusb_open get iProduct failed, retrying...
0.005119 [D1] nut_libusb_open get iProduct failed, retrying...
0.005281 [D1] nut_libusb_open get iProduct failed, retrying...
0.005455 [D1] nut_libusb_open get iSerialNumber failed, retrying...
0.005627 [D1] nut_libusb_open get iSerialNumber failed, retrying...
0.005786 [D1] nut_libusb_open get iSerialNumber failed, retrying...
0.006593 Using subdriver: Salicru HID 0.3.1
0.006599 [D1] 2 HID objects found
0.006769 nut_libusb_get_report: Success
0.006776 [D1] Can't retrieve Report 00: Resource temporarily unavailable
0.006785 [D1] Path: ff000001.ff000002, Type: Input, ReportID: 0x00, Offset: 0, Size: 8
0.006952 nut_libusb_get_report: Success
0.006957 [D1] Can't retrieve Report 00: Resource temporarily unavailable
0.006964 [D1] Path: ff000001.ff000002, Type: Output, ReportID: 0x00, Offset: 0, Size: 8
0.006975 [D1] Detected a UPS: Salicru/unknown
0.007049 [D1] upsdrv_initinfo...
0.007061 [D1] upsdrv_updateinfo...
0.007065 [D1] Not using interrupt pipe...
0.007071 [D1] Quick update...
0.007529 [D1] Group and/or user account for this driver was customized ('root:nut') compared to built-in defaults. Fixing socket '/var/state/ups/usbhid-ups-upsslc' ownership/access.
0.007545 [D1] Group access for this driver successfully fixed
0.007553 [D1] upsdrv_updateinfo...
0.007557 [D1] Not using interrupt pipe...
0.007561 [D1] Quick update...
2.009644 [D1] upsdrv_updateinfo...
2.009680 [D1] Not using interrupt pipe...
2.009692 [D1] Quick update...
4.011751 [D1] upsdrv_updateinfo...
4.011785 [D1] Not using interrupt pipe...
4.011796 [D1] Quick update...
Hm, one more idea popped up: since you've had to add a productid to the sources, chances are that the value is not listed in your installed udev.rules (or newer hwdb) and so the system default handler grabs the device and keeps the NUT driver out.
I have managed to make the Salicru ADV3000-RT UPS work, following the ideas of issue #1856, the only thing that does not appear is "Not supported", and neither is the battery autonomy, for the rest, everything seems correct.
Bus 001 Device 002: ID 2e66:0101 Salicru ADV3000-RT
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x2e66
idProduct 0x0101
bcdDevice 0.02
iManufacturer 3 Salicru
iProduct 1 ADV3000-RT
iSerial 2 0000000000000000
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 0x003b
bNumInterfaces 2
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.10
bCountryCode 25 Spanish
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 27
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0008 1x 8 bytes
bInterval 8
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.10
bCountryCode 25 Spanish
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 625
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0008 1x 8 bytes
bInterval 8
[sai2]
driver = nutdrv_qx
port = auto
productid=0101
vendorid=2e66
protocol=voltronic
subdriver=cypress
# /lib64/nut/nutdrv_qx -DDDDDD -s 2e66:0101 -x vendorid=2e66 -x productid=0101 -x protocol=voltronic -x subdriver=cypress -x port=auto -u root -g root
0.000000 [D3] main_arg: var='vendorid' val='2e66'
0.000028 [D5] send_to_all: SETINFO driver.parameter.vendorid "2e66"
0.000033 [D3] main_arg: var='productid' val='0101'
0.000037 [D5] send_to_all: SETINFO driver.parameter.productid "0101"
0.000039 [D3] main_arg: var='protocol' val='voltronic'
0.000042 [D5] send_to_all: SETINFO driver.parameter.protocol "voltronic"
0.000045 [D3] main_arg: var='subdriver' val='cypress'
0.000048 [D5] send_to_all: SETINFO driver.parameter.subdriver "cypress"
0.000050 [D3] main_arg: var='port' val='auto'
0.000053 [D5] send_to_all: SETINFO driver.parameter.port "auto"
0.000056 [D1] Built-in default or configured user for drivers 'nut' was ignored due to 'root' specified on command line
0.000058 [D1] Built-in default or configured group for drivers 'nut' was ignored due to 'root' specified on command line
0.000061 [D1] Network UPS Tools version 2.8.0-Windows-676-g72d32537 (release/snapshot of 2.8.0.1) built with x86_64-pc-linux-gnu-gcc (Gentoo 12.2.1_p20230121-r1 p10) 12.2.1 20230121 and configured with flags: --prefix=/usr --build=x86_64-pc-linux-gnu --host=x86_64-pc-linux-gnu --mandir=/usr/share/man --infodir=/usr/share/info --datadir=/usr/share --sysconfdir=/etc --localstatedir=/var/lib --disable-dependency-tracking --disable-silent-rules --docdir=/usr/share/doc/nut-9999 --htmldir=/usr/share/doc/nut-9999/html --with-sysroot=/ --libdir=/usr/lib64 --sysconfdir=/etc/nut --datarootdir=/usr/share/nut --datadir=/usr/share/nut --disable-static --with-statepath=/var/lib/nut --with-drvpath=/lib64/nut --with-htmlpath=/usr/share/nut/html --with-user=nut --with-group=nut --with-logfacility=LOG_DAEMON --with-dev --with-serial --with-systemdsystemunitdir=/lib/systemd/system --without-powerman --with-cgi --with-ipmi --with-freeipmi --with-snmp --with-ssl --without-wrap --with-usb --without-neon --without-avahi --with-drivers=al175,apcsmart,apcsmart-old,apcupsd-ups,bcmxcp,bcmxcp_usb,belkin,belkinunv,bestfcom,bestfortress,bestuferrups,bestups,blazer_ser,blazer_usb,clone,clone-outlet,dummy-ups,etapro,everups,gamatronic,genericups,isbmex,ivtscd,liebert,liebert-esp2,masterguard,metasys,mge-shut,mge-utalk,microdowell,nutdrv_qx,oneac,optiups,powercom,powerpanel,rhino,richcomm_usb,riello_ser,riello_usb,safenet,snmp-ups,solis,tripplite,tripplite_usb,tripplitesu,upscode2,usbhid-ups,victronups --with-cgipath=/usr/share/nut/cgi
0.000066 [D1] debug level is '6'
0.000333 [D1] Succeeded to become_user(root): now UID=0 GID=0
0.000343 [D5] send_to_all: SETINFO device.type "ups"
0.000346 [D5] send_to_all: SETINFO driver.state "init.device"
0.000349 [D1] upsdrv_initups...
0.002868 [D2] Checking device 1 of 8 (413C/A101)
0.003507 [D2] - VendorID: 413c
0.003511 [D2] - ProductID: a101
0.003514 [D2] - Manufacturer: DELL
0.003516 [D2] - Product: Internal Dual SD
0.003518 [D2] - Serial Number: 012345678901
0.003521 [D2] - Bus: 002
0.003523 [D2] - Device: 002
0.003526 [D2] - Device release number: 0000
0.003528 [D2] Trying to match device
0.003531 [D3] match_function_regex: matching a device...
0.003536 [D2] match_function_regex: failed match of VendorID: 413c
0.003538 [D2] Device does not match - skipping
0.003544 [D2] Checking device 2 of 8 (1D6B/0003)
0.003581 [D2] - VendorID: 1d6b
0.003584 [D2] - ProductID: 0003
0.003586 [D2] - Manufacturer: Linux 6.1.19-gentoo xhci-hcd
0.003589 [D2] - Product: xHCI Host Controller
0.003591 [D2] - Serial Number: 0000:00:14.0
0.003593 [D2] - Bus: 002
0.003595 [D2] - Device: 001
0.003598 [D2] - Device release number: 0601
0.003600 [D2] Trying to match device
0.003602 [D3] match_function_regex: matching a device...
0.003605 [D2] match_function_regex: failed match of VendorID: 1d6b
0.003607 [D2] Device does not match - skipping
0.003612 [D2] Checking device 3 of 8 (1604/10C0)
0.003619 [D2] - VendorID: 1604
0.003621 [D2] - ProductID: 10c0
0.003624 [D2] - Manufacturer: unknown
0.003626 [D2] - Product: unknown
0.003628 [D2] - Serial Number: unknown
0.003630 [D2] - Bus: 001
0.003640 [D2] - Device: 006
0.003642 [D2] - Device release number: 0000
0.003644 [D2] Trying to match device
0.003646 [D3] match_function_regex: matching a device...
0.003649 [D2] match_function_regex: failed match of VendorID: 1604
0.003651 [D2] Device does not match - skipping
0.003655 [D2] Checking device 4 of 8 (1604/10C0)
0.003660 [D2] - VendorID: 1604
0.003662 [D2] - ProductID: 10c0
0.003665 [D2] - Manufacturer: unknown
0.003667 [D2] - Product: unknown
0.003669 [D2] - Serial Number: unknown
0.003671 [D2] - Bus: 001
0.003673 [D2] - Device: 005
0.003676 [D2] - Device release number: 0000
0.003678 [D2] Trying to match device
0.003680 [D3] match_function_regex: matching a device...
0.003683 [D2] match_function_regex: failed match of VendorID: 1604
0.003685 [D2] Device does not match - skipping
0.003688 [D2] Checking device 5 of 8 (1604/10C0)
0.003693 [D2] - VendorID: 1604
0.003695 [D2] - ProductID: 10c0
0.003698 [D2] - Manufacturer: unknown
0.003700 [D2] - Product: unknown
0.003702 [D2] - Serial Number: unknown
0.003704 [D2] - Bus: 001
0.003706 [D2] - Device: 004
0.003709 [D2] - Device release number: 0000
0.003711 [D2] Trying to match device
0.003713 [D3] match_function_regex: matching a device...
0.003715 [D2] match_function_regex: failed match of VendorID: 1604
0.003718 [D2] Device does not match - skipping
0.003721 [D2] Checking device 6 of 8 (10D5/5A08)
0.005888 [D2] - VendorID: 10d5
0.005891 [D2] - ProductID: 5a08
0.005893 [D2] - Manufacturer: No brand
0.005895 [D2] - Product: KVM
0.005898 [D2] - Serial Number: unknown
0.005900 [D2] - Bus: 001
0.005902 [D2] - Device: 003
0.005904 [D2] - Device release number: 0000
0.005906 [D2] Trying to match device
0.005909 [D3] match_function_regex: matching a device...
0.005911 [D2] match_function_regex: failed match of VendorID: 10d5
0.005913 [D2] Device does not match - skipping
0.005917 [D2] Checking device 7 of 8 (2E66/0101)
0.007574 [D2] - VendorID: 2e66
0.007577 [D2] - ProductID: 0101
0.007579 [D2] - Manufacturer: Salicru
0.007582 [D2] - Product: ADV3000-RT
0.007584 [D2] - Serial Number: 0000000000000000
0.007586 [D2] - Bus: 001
0.007588 [D2] - Device: 002
0.007590 [D2] - Device release number: 0002
0.007593 [D2] Trying to match device
0.007595 [D3] match_function_regex: matching a device...
0.007635 [D2] Device matches
0.007638 [D2] Reading first configuration descriptor
0.007644 [D3] libusb_kernel_driver_active() returned 0: Success
0.007655 [D2] Claimed interface 0 successfully
0.007658 [D3] nut_usb_set_altinterface: skipped libusb_set_interface_alt_setting(udev, 0, 0)
0.007664 [D5] send_to_all: SETINFO ups.vendorid "2e66"
0.007668 [D5] send_to_all: SETINFO ups.productid "0101"
0.007902 [D3] send: QGS
0.015685 [D5] read [ 0]: (8 bytes) => 28 56 45 52 46 57 3a 30
0.079672 [D5] read [ 8]: (8 bytes) => 28 32 33 30 2e 33 20 35
0.087667 [D5] read [ 16]: (8 bytes) => 30 2e 30 20 32 33 30 2e
0.103670 [D5] read [ 24]: (8 bytes) => 33 20 35 30 2e 30 20 30
0.119676 [D5] read [ 32]: (8 bytes) => 30 31 2e 38 20 30 31 34
0.135671 [D5] read [ 40]: (8 bytes) => 20 33 36 36 2e 31 20 2d
0.151674 [D5] read [ 48]: (8 bytes) => 2d 2d 2e 2d 20 30 38 32
0.159668 [D5] read [ 56]: (8 bytes) => 2e 31 20 2d 2d 2d 2e 2d
0.191680 [D5] read [ 64]: (8 bytes) => 20 30 32 30 2e 35 20 30
0.207668 [D5] read [ 72]: (8 bytes) => 31 30 30 30 30 30 30 30
0.215671 [D5] read [ 80]: (8 bytes) => 30 30 31 0d 00 00 00 00
0.215679 [D3] read: (VERFW:0(230.3 50.0 230.3 50.0 001.8 014 366.1 ---.- 082.1 ---.- 020.5 010000000001
0.215690 [D2] ups_infoval_set: non numerical value [input.voltage: VERFW]
0.215926 [D3] send: QGS
0.447711 [D5] read [ 0]: (8 bytes) => 28 32 33 31 2e 30 20 34
0.455678 [D5] read [ 8]: (8 bytes) => 39 2e 39 20 32 33 31 2e
0.471673 [D5] read [ 16]: (8 bytes) => 30 20 35 30 2e 30 20 30
0.487669 [D5] read [ 24]: (8 bytes) => 30 31 2e 37 20 30 31 34
0.503672 [D5] read [ 32]: (8 bytes) => 20 33 36 36 2e 30 20 2d
0.519670 [D5] read [ 40]: (8 bytes) => 2d 2d 2e 2d 20 30 38 32
0.527668 [D5] read [ 48]: (8 bytes) => 2e 31 20 2d 2d 2d 2e 2d
0.543669 [D5] read [ 56]: (8 bytes) => 20 30 32 30 2e 35 20 30
0.551668 [D5] read [ 64]: (8 bytes) => 31 30 30 30 30 30 30 30
0.559675 [D5] read [ 72]: (8 bytes) => 30 30 31 0d 00 00 00 00
0.559685 [D3] read: (231.0 49.9 231.0 50.0 001.7 014 366.0 ---.- 082.1 ---.- 020.5 010000000001
0.559702 [D5] send_to_all: SETINFO input.voltage "231.0"
0.559936 [D3] send: QPI
0.807700 [D5] read [ 0]: (8 bytes) => 28 50 49 30 30 0d 00 00
0.807714 [D3] read: (PI00
0.807741 [D5] send_to_all: SETINFO ups.firmware.aux "P00"
0.807744 Using protocol: Voltronic 0.06
0.807748 [D5] send_to_all: SETINFO driver.state "init.quiet"
0.807753 [D5] send_to_all: SETINFO driver.version "2.8.0-Windows-676-g72d32537"
0.807757 [D5] send_to_all: SETINFO driver.version.internal "0.32"
0.807760 [D5] send_to_all: SETINFO driver.name "nutdrv_qx"
0.807763 [D5] send_to_all: SETINFO driver.state "init.info"
0.807766 [D1] upsdrv_initinfo...
0.807770 [D5] send_to_all: SETINFO driver.version.data "Voltronic 0.06"
0.808008 [D3] send: QRI
0.871694 [D5] read [ 0]: (8 bytes) => 28 32 33 30 2e 30 20 30
0.887677 [D5] read [ 8]: (8 bytes) => 31 33 20 30 37 32 2e 30
0.895669 [D5] read [ 16]: (8 bytes) => 20 35 30 2e 30 0d 00 00
0.895674 [D3] read: (230.0 013 072.0 50.0
0.895688 [D5] send_to_all: SETINFO output.voltage.nominal "230.0"
0.895695 [D5] send_to_all: SETINFO output.current.nominal "13"
0.895700 [D5] send_to_all: SETINFO battery.voltage.nominal "72.0"
0.895705 [D5] send_to_all: SETINFO output.frequency.nominal "50.0"
0.895936 [D3] send: QMD
0.951672 [D5] read [ 0]: (8 bytes) => 28 23 23 23 23 41 44 56
0.975681 [D5] read [ 8]: (8 bytes) => 33 30 30 30 2d 52 54 32
0.991669 [D5] read [ 16]: (8 bytes) => 20 23 23 23 33 30 30 30
1.007688 [D5] read [ 24]: (8 bytes) => 20 39 30 20 31 2f 31 20
1.023687 [D5] read [ 32]: (8 bytes) => 32 33 30 20 32 33 30 20
1.047676 [D5] read [ 40]: (8 bytes) => 30 36 20 31 32 2e 30 0d
1.047682 [D3] read: (####ADV3000-RT2 ###3000 90 1/1 230 230 06 12.0
1.047697 [D5] send_to_all: SETINFO device.model "ADV3000-RT2"
1.047703 [D5] send_to_all: SETINFO ups.power.nominal "3000"
1.047711 [D5] send_to_all: SETINFO output.powerfactor "0.9"
1.047715 [D5] send_to_all: SETINFO input.phases "1"
1.047719 [D5] send_to_all: SETINFO output.phases "1"
1.047725 [D5] send_to_all: SETINFO input.voltage.nominal "230.0"
1.049532 [D3] send: F
1.255705 [D5] read [ 0]: (8 bytes) => 23 32 33 30 2e 30 20 30
1.271677 [D5] read [ 8]: (8 bytes) => 31 33 20 30 37 32 2e 30
1.279673 [D5] read [ 16]: (8 bytes) => 20 35 30 2e 30 0d 00 00
1.279679 [D3] read: #230.0 013 072.0 50.0
1.279692 [D5] send_to_all: SETINFO input.current.nominal "13.0"
1.279702 [D5] send_to_all: SETINFO input.frequency.nominal "50.0"
1.279937 [D3] send: QMF
1.423699 [D5] read [ 0]: (8 bytes) => 28 23 23 23 23 23 23 23
1.431675 [D5] read [ 8]: (8 bytes) => 23 23 23 23 23 23 23 23
1.439673 [D5] read [ 16]: (8 bytes) => 23 23 23 23 23 23 23 23
1.447672 [D5] read [ 24]: (8 bytes) => 23 23 23 0d 00 00 00 00
1.447677 [D3] read: (##########################
1.447685 [D1] ups_infoval_set: non significant value [device.mfr]
1.447925 [D3] send: QVFW
1.583701 [D5] read [ 0]: (8 bytes) => 28 56 45 52 46 57 3a 30
1.591675 [D5] read [ 8]: (8 bytes) => 32 31 32 34 2e 30 32 0d
1.591680 [D3] read: (VERFW:02124.02
1.591689 [D5] send_to_all: SETINFO ups.firmware "02124.02"
1.591925 [D3] send: QID
1.655691 [D5] read [ 0]: (8 bytes) => 28 30 30 30 30 30 30 30
1.663677 [D5] read [ 8]: (8 bytes) => 30 30 30 30 30 30 30 30
1.671676 [D5] read [ 16]: (8 bytes) => 30 0d 00 00 00 00 00 00
1.671681 [D3] read: (0000000000000000
1.671687 device.serial: UPS reported a non-significant serial [0000000000000000]
1.671690 [D4] ups_infoval_set: failed to preprocess value [device.serial: 0000000000000000]
1.671942 [D3] send: I
1.703689 [D5] read [ 0]: (8 bytes) => 23 20 20 20 20 20 20 20
1.711675 [D5] read [ 8]: (8 bytes) => 20 20 20 20 20 20 20 20
1.735681 [D5] read [ 16]: (8 bytes) => 20 41 44 56 33 30 30 30
1.751678 [D5] read [ 24]: (8 bytes) => 20 20 20 20 30 32 31 32
1.759674 [D5] read [ 32]: (8 bytes) => 34 2e 30 32 20 20 0d 00
1.759679 [D3] read: # ADV3000 02124.02
1.759686 [D1] ups_infoval_set: non significant value [device.mfr]
1.761790 [D3] send: QGS
2.031705 [D5] read [ 0]: (8 bytes) => 28 32 33 31 2e 30 20 35
2.039680 [D5] read [ 8]: (8 bytes) => 30 2e 30 20 32 33 30 2e
2.071708 [D5] read [ 16]: (8 bytes) => 39 20 35 30 2e 30 20 30
2.079689 [D5] read [ 24]: (8 bytes) => 30 31 2e 38 20 30 31 34
2.095705 [D5] read [ 32]: (8 bytes) => 20 33 36 35 2e 34 20 2d
2.111699 [D5] read [ 40]: (8 bytes) => 2d 2d 2e 2d 20 30 38 32
2.119695 [D5] read [ 48]: (8 bytes) => 2e 31 20 2d 2d 2d 2e 2d
2.135692 [D5] read [ 56]: (8 bytes) => 20 30 32 30 2e 35 20 30
2.151680 [D5] read [ 64]: (8 bytes) => 31 30 30 30 30 30 30 30
2.159677 [D5] read [ 72]: (8 bytes) => 30 30 31 0d 00 00 00 00
2.159683 [D3] read: (231.0 50.0 230.9 50.0 001.8 014 365.4 ---.- 082.1 ---.- 020.5 010000000001
2.159698 [D5] send_to_all: SETINFO input.frequency "50.0"
2.159707 [D5] send_to_all: SETINFO output.voltage "230.9"
2.159712 [D5] send_to_all: SETINFO output.frequency "50.0"
2.159716 [D5] send_to_all: SETINFO output.current "1.8"
2.159721 [D5] send_to_all: SETINFO ups.load "14"
2.159726 [D5] send_to_all: SETINFO battery.voltage "82.10"
2.159730 [D5] send_to_all: SETINFO ups.temperature "20.5"
2.159735 [D5] send_to_all: SETINFO ups.type "line-interactive"
2.159739 [D5] update_status: OL
2.159742 [D5] update_status: !LB
2.159747 [D5] update_status: !CAL
2.159750 [D5] update_status: !FSD
2.159754 [D5] send_to_all: SETINFO ups.beeper.status "enabled"
2.159988 [D3] send: QMOD
2.303708 [D5] read [ 0]: (8 bytes) => 28 4c 0d 00 00 00 00 00
2.303729 [D3] read: (L
2.303737 [D5] update_status: OL
2.303977 [D3] send: QWS
2.359701 [D5] read [ 0]: (8 bytes) => 28 30 30 30 30 30 30 30
2.367677 [D5] read [ 8]: (8 bytes) => 30 30 30 30 30 30 30 30
2.383680 [D5] read [ 16]: (8 bytes) => 30 30 30 30 30 30 30 30
2.391678 [D5] read [ 24]: (8 bytes) => 30 30 30 30 30 30 30 30
2.407678 [D5] read [ 32]: (8 bytes) => 30 30 30 30 30 30 30 30
2.415680 [D5] read [ 40]: (8 bytes) => 30 30 30 30 30 30 30 30
2.439680 [D5] read [ 48]: (8 bytes) => 30 30 30 30 30 30 30 30
2.447678 [D5] read [ 56]: (8 bytes) => 30 30 30 30 30 30 30 30
2.455677 [D5] read [ 64]: (8 bytes) => 30 0d 00 00 00 00 00 00
2.455683 [D3] read: (0000000000000000000000000000000000000000000000000000000000000000
2.455927 [D3] send: QBV
2.511691 [D5] read [ 0]: (8 bytes) => 28 30 38 32 2e 31 20 30
2.535698 [D5] read [ 8]: (8 bytes) => 36 20 30 31 20 31 30 30
2.543678 [D5] read [ 16]: (8 bytes) => 20 30 30 30 35 37 0d 00
2.543683 [D3] read: (082.1 06 01 100 00057
2.543691 battery_number: 6
2.543704 battery_number, settable range: 1..9
2.543714 [D5] send_to_all: SETINFO battery.packs "1"
2.543717 [D5] send_to_all: SETFLAGS battery.packs RW
2.543721 [D5] send_to_all: ADDRANGE battery.packs 1 99
2.543724 [D5] send_to_all: SETFLAGS battery.packs RW NUMBER
2.543729 [D5] send_to_all: SETINFO battery.charge "100"
2.543735 [D5] send_to_all: SETINFO battery.runtime "0"
2.543969 [D3] send: QLDL
2.607700 [D5] read [ 0]: (8 bytes) => 28 30 31 31 20 30 31 33
2.615688 [D5] read [ 8]: (8 bytes) => 0d 00 00 00 00 00 00 00
2.615697 [D3] read: (011 013
2.615707 [D5] send_to_all: SETINFO output.power.minimum.percent "11"
2.615713 [D5] send_to_all: SETINFO output.power.maximum.percent "13"
2.615949 [D3] send: QFLAG
2.751698 [D5] read [ 0]: (8 bytes) => 28 45 62 72 61 73 63 6c
2.815702 [D5] read [ 8]: (8 bytes) => 7a 30 44 67 6a 6d 0d 00
2.815730 [D3] read: (Ebrasclz0Dgjm
2.815748 [D5] send_to_all: SETINFO ups.start.auto "yes"
2.815752 [D5] send_to_all: SETFLAGS ups.start.auto RW
2.815756 [D5] send_to_all: ADDENUM ups.start.auto "no"
2.815759 [D5] send_to_all: ADDENUM ups.start.auto "yes"
2.815765 [D5] send_to_all: SETINFO battery.protection "yes"
2.815768 [D5] send_to_all: SETFLAGS battery.protection RW
2.815771 [D5] send_to_all: ADDENUM battery.protection "no"
2.815774 [D5] send_to_all: ADDENUM battery.protection "yes"
2.815778 [D5] send_to_all: SETINFO battery.energysave "no"
2.815781 [D5] send_to_all: SETFLAGS battery.energysave RW
2.815783 [D5] send_to_all: ADDENUM battery.energysave "no"
2.815786 [D5] send_to_all: ADDENUM battery.energysave "yes"
2.815791 [D5] send_to_all: SETINFO ups.start.battery "yes"
2.815794 [D5] send_to_all: SETFLAGS ups.start.battery RW
2.815797 [D5] send_to_all: ADDENUM ups.start.battery "no"
2.815799 [D5] send_to_all: ADDENUM ups.start.battery "yes"
2.815805 [D5] send_to_all: SETINFO outlet.0.switchable "no"
2.815807 [D5] send_to_all: SETFLAGS outlet.0.switchable RW
2.815810 [D5] send_to_all: ADDENUM outlet.0.switchable "no"
2.815813 [D5] send_to_all: ADDENUM outlet.0.switchable "yes"
2.815817 [D4] ups_infoval_set: failed to preprocess value [bypass_alarm: Ebrasclz0Dgjm]
2.815821 battery_alarm: enabled
2.815824 [D4] ups_infoval_set: failed to preprocess value [bypass_when_off: Ebrasclz0Dgjm]
2.815832 alarm_control: enabled
2.815835 [D4] ups_infoval_set: failed to preprocess value [converter_mode: Ebrasclz0Dgjm]
2.815838 [D4] ups_infoval_set: failed to preprocess value [eco_mode: Ebrasclz0Dgjm]
2.815841 [D4] ups_infoval_set: failed to preprocess value [battery_open_status_check: Ebrasclz0Dgjm]
2.815844 [D4] ups_infoval_set: failed to preprocess value [bypass_forbidding: Ebrasclz0Dgjm]
2.815848 site_fault_detection: enabled
2.815851 [D4] ups_infoval_set: failed to preprocess value [advanced_eco_mode: Ebrasclz0Dgjm]
2.815854 [D4] ups_infoval_set: failed to preprocess value [constant_phase_angle: Ebrasclz0Dgjm]
2.815857 [D4] ups_infoval_set: failed to preprocess value [limited_runtime_on_battery: Ebrasclz0Dgjm]
2.815862 [D2] setvar: nothing to do... [battery_number]
2.816099 [D3] send: RE0
2.887701 [D5] read [ 0]: (8 bytes) => 28 4e 41 4b 0d 00 00 00
2.887708 [D3] read: (NAK
2.887711 [D2] qx_process_answer: query rejected by the UPS (battery.voltage.low)
2.887946 [D3] send: QPD
2.951692 [D5] read [ 0]: (8 bytes) => 28 4e 41 4b 0d 00 00 00
2.951703 [D3] read: (NAK
2.951707 [D2] qx_process_answer: query rejected by the UPS (input_phase_angle)
2.951713 [D2] qx_process_answer: query rejected by the UPS (output_phase_angle)
2.953888 [D3] send: QPAR
3.111705 [D5] read [ 0]: (8 bytes) => 28 4e 41 4b 0d 00 00 00
3.111720 [D3] read: (NAK
3.111725 [D2] qx_process_answer: query rejected by the UPS (voltronic_parallel)
3.111732 [D5] send_to_all: ADDCMD load.off
3.111735 [D5] send_to_all: ADDCMD load.on
3.111738 [D5] send_to_all: ADDCMD shutdown.return
3.111741 [D5] send_to_all: ADDCMD shutdown.stayoff
3.111744 [D5] send_to_all: ADDCMD shutdown.stop
3.111747 [D5] send_to_all: ADDCMD test.battery.start
3.111750 [D5] send_to_all: ADDCMD test.battery.start.deep
3.111752 [D5] send_to_all: ADDCMD test.battery.start.quick
3.111755 [D5] send_to_all: ADDCMD test.battery.stop
3.111759 [D5] send_to_all: ADDCMD beeper.toggle
3.111761 [D5] send_to_all: ADDCMD beeper.enable
3.111764 [D5] send_to_all: ADDCMD beeper.disable
3.111769 [D5] send_to_all: SETINFO ups.delay.start "180"
3.111772 [D5] send_to_all: SETFLAGS ups.delay.start RW
3.111776 [D5] send_to_all: ADDRANGE ups.delay.start 0 599940
3.111779 [D5] send_to_all: SETFLAGS ups.delay.start RW NUMBER
3.111782 [D5] send_to_all: SETINFO ups.delay.shutdown "30"
3.111785 [D5] send_to_all: SETFLAGS ups.delay.shutdown RW
3.111788 [D5] send_to_all: ADDRANGE ups.delay.shutdown 12 5940
3.111790 [D5] send_to_all: SETFLAGS ups.delay.shutdown RW NUMBER
3.111811 [D5] send_to_all: SETINFO driver.parameter.pollfreq "30"
3.111821 [D5] send_to_all: SETINFO driver.state "init.updateinfo"
3.111824 [D1] upsdrv_updateinfo...
3.111827 [D1] Quick update...
3.112064 [D3] send: QGS
3.191695 [D5] read [ 0]: (8 bytes) => 28 32 33 30 2e 38 20 35
3.207689 [D5] read [ 8]: (8 bytes) => 30 2e 30 20 32 33 30 2e
3.223688 [D5] read [ 16]: (8 bytes) => 39 20 35 30 2e 30 20 30
3.239687 [D5] read [ 24]: (8 bytes) => 30 31 2e 38 20 30 31 34
3.255684 [D5] read [ 32]: (8 bytes) => 20 33 36 34 2e 39 20 2d
3.271682 [D5] read [ 40]: (8 bytes) => 2d 2d 2e 2d 20 30 38 32
3.279681 [D5] read [ 48]: (8 bytes) => 2e 30 20 2d 2d 2d 2e 2d
3.295681 [D5] read [ 56]: (8 bytes) => 20 30 32 30 2e 33 20 30
3.303680 [D5] read [ 64]: (8 bytes) => 31 30 30 30 30 30 30 30
3.311691 [D5] read [ 72]: (8 bytes) => 30 30 31 0d 00 00 00 00
3.311702 [D3] read: (230.8 50.0 230.9 50.0 001.8 014 364.9 ---.- 082.0 ---.- 020.3 010000000001
3.311710 [D5] update_status: OL
3.311714 [D5] update_status: !LB
3.311718 [D5] update_status: !CAL
3.311721 [D5] update_status: !FSD
3.311730 [D5] send_to_all: SETINFO ups.status "OL"
3.311733 [D5] send_to_all: DATAOK
3.311737 [D5] send_to_all: SETINFO driver.state "init.quiet"
3.311818 [D2] dstate_init: sock /var/lib/nut/nutdrv_qx-2e66:0101 open on fd 10
3.311853 [D1] Group and/or user account for this driver was customized ('root:root') compared to built-in defaults. Fixing socket '/var/lib/nut/nutdrv_qx-2e66:0101' ownership/access.
3.311864 [D1] Group access for this driver successfully fixed
3.311869 [D5] send_to_all: SETINFO driver.parameter.pollinterval "2"
3.311872 [D5] send_to_all: SETINFO driver.parameter.synchronous "auto"
3.311876 [D5] send_to_all: SETINFO driver.state "quiet"
3.311879 [D1] Driver initialization completed, beginning regular infinite loop
3.311883 [D6] upsnotify: notify about state 2 with libsystemd: was requested, but not running as a service unit now, will not spam more about it
3.311886 [D6] upsnotify: failed to notify about state 2: no notification tech defined, will not spam more about it
3.311889 [D6] upsnotify: logged the systemd watchdog situation once, will not spam more about it
3.311892 [D5] send_to_all: SETINFO driver.state "updateinfo"
3.311895 [D1] upsdrv_updateinfo...
3.311898 [D1] Quick update...
3.312133 [D3] send: QGS
3.455708 [D5] read [ 0]: (8 bytes) => 28 32 33 30 2e 34 20 35
3.471697 [D5] read [ 8]: (8 bytes) => 30 2e 30 20 32 33 30 2e
3.487688 [D5] read [ 16]: (8 bytes) => 36 20 35 30 2e 30 20 30
3.495685 [D5] read [ 24]: (8 bytes) => 30 31 2e 38 20 30 31 34
3.511685 [D5] read [ 32]: (8 bytes) => 20 33 36 34 2e 38 20 2d
3.527701 [D5] read [ 40]: (8 bytes) => 2d 2d 2e 2d 20 30 38 32
3.535686 [D5] read [ 48]: (8 bytes) => 2e 31 20 2d 2d 2d 2e 2d
3.559691 [D5] read [ 56]: (8 bytes) => 20 30 32 30 2e 35 20 30
3.567685 [D5] read [ 64]: (8 bytes) => 31 30 30 30 30 30 30 30
3.575688 [D5] read [ 72]: (8 bytes) => 30 30 31 0d 00 00 00 00
3.575697 [D3] read: (230.4 50.0 230.6 50.0 001.8 014 364.8 ---.- 082.1 ---.- 020.5 010000000001
3.575705 [D5] update_status: OL
3.575710 [D5] update_status: !LB
3.575714 [D5] update_status: !CAL
3.575717 [D5] update_status: !FSD
3.575726 [D5] send_to_all: SETINFO driver.state "quiet"
5.312551 [D5] send_to_all: SETINFO driver.state "updateinfo"
5.312576 [D1] upsdrv_updateinfo...
5.312580 [D1] Quick update...
5.312840 [D3] send: QGS
5.367715 [D5] read [ 0]: (8 bytes) => 28 32 33 30 2e 31 20 35
5.383708 [D5] read [ 8]: (8 bytes) => 30 2e 30 20 32 32 39 2e
5.399694 [D5] read [ 16]: (8 bytes) => 38 20 35 30 2e 30 20 30
5.415693 [D5] read [ 24]: (8 bytes) => 30 31 2e 37 20 30 31 34
5.431703 [D5] read [ 32]: (8 bytes) => 20 33 36 36 2e 32 20 2d
5.439707 [D5] read [ 40]: (8 bytes) => 2d 2d 2e 2d 20 30 38 32
5.455698 [D5] read [ 48]: (8 bytes) => 2e 31 20 2d 2d 2d 2e 2d
5.495706 [D5] read [ 56]: (8 bytes) => 20 30 32 30 2e 35 20 30
5.503689 [D5] read [ 64]: (8 bytes) => 31 30 30 30 30 30 30 30
5.511689 [D5] read [ 72]: (8 bytes) => 30 30 31 0d 00 00 00 00
5.511693 [D3] read: (230.1 50.0 229.8 50.0 001.7 014 366.2 ---.- 082.1 ---.- 020.5 010000000001
5.511701 [D5] update_status: OL
5.511705 [D5] update_status: !LB
5.511709 [D5] update_status: !CAL
5.511712 [D5] update_status: !FSD
5.511720 [D5] send_to_all: SETINFO driver.state "quiet"
7.314364 [D5] send_to_all: SETINFO driver.state "updateinfo"
7.314394 [D1] upsdrv_updateinfo...
7.314399 [D1] Quick update...
7.314660 [D3] send: QGS
7.367718 [D5] read [ 0]: (8 bytes) => 28 32 33 30 2e 37 20 35
7.375698 [D5] read [ 8]: (8 bytes) => 30 2e 30 20 32 33 30 2e
7.391701 [D5] read [ 16]: (8 bytes) => 38 20 35 30 2e 30 20 30
7.407699 [D5] read [ 24]: (8 bytes) => 30 31 2e 38 20 30 31 33
7.423698 [D5] read [ 32]: (8 bytes) => 20 33 36 35 2e 33 20 2d
7.431698 [D5] read [ 40]: (8 bytes) => 2d 2d 2e 2d 20 30 38 32
7.447699 [D5] read [ 48]: (8 bytes) => 2e 31 20 2d 2d 2d 2e 2d
7.463696 [D5] read [ 56]: (8 bytes) => 20 30 32 30 2e 35 20 30
7.471697 [D5] read [ 64]: (8 bytes) => 31 30 30 30 30 30 30 30
7.479700 [D5] read [ 72]: (8 bytes) => 30 30 31 0d 00 00 00 00
7.479709 [D3] read: (230.7 50.0 230.8 50.0 001.8 013 365.3 ---.- 082.1 ---.- 020.5 010000000001
7.479717 [D5] update_status: OL
7.479722 [D5] update_status: !LB
7.479726 [D5] update_status: !CAL
7.479729 [D5] update_status: !FSD
7.479739 [D5] send_to_all: SETINFO driver.state "quiet"
9.316214 [D5] send_to_all: SETINFO driver.state "updateinfo"
9.316238 [D1] upsdrv_updateinfo...
9.316242 [D1] Quick update...
9.316501 [D3] send: QGS
9.367723 [D5] read [ 0]: (8 bytes) => 28 32 33 30 2e 34 20 35
9.375706 [D5] read [ 8]: (8 bytes) => 30 2e 30 20 32 33 30 2e
9.399707 [D5] read [ 16]: (8 bytes) => 38 20 35 30 2e 30 20 30
9.407727 [D5] read [ 24]: (8 bytes) => 30 31 2e 37 20 30 31 33
9.431710 [D5] read [ 32]: (8 bytes) => 20 33 36 34 2e 36 20 2d
9.439712 [D5] read [ 40]: (8 bytes) => 2d 2d 2e 2d 20 30 38 32
9.455709 [D5] read [ 48]: (8 bytes) => 2e 31 20 2d 2d 2d 2e 2d
9.487711 [D5] read [ 56]: (8 bytes) => 20 30 32 30 2e 33 20 30
9.495707 [D5] read [ 64]: (8 bytes) => 31 30 30 30 30 30 30 30
9.503707 [D5] read [ 72]: (8 bytes) => 30 30 31 0d 00 00 00 00
9.503713 [D3] read: (230.4 50.0 230.8 50.0 001.7 013 364.6 ---.- 082.1 ---.- 020.3 010000000001
9.503721 [D5] update_status: OL
9.503726 [D5] update_status: !LB
9.503731 [D5] update_status: !CAL
9.503735 [D5] update_status: !FSD
9.503743 [D5] send_to_all: SETINFO driver.state "quiet"
11.318043 [D5] send_to_all: SETINFO driver.state "updateinfo"
11.318073 [D1] upsdrv_updateinfo...
11.318080 [D1] Quick update...
11.318346 [D3] send: QGS
11.375744 [D5] read [ 0]: (8 bytes) => 28 32 32 39 2e 31 20 35
11.383731 [D5] read [ 8]: (8 bytes) => 30 2e 30 20 32 32 39 2e
11.399731 [D5] read [ 16]: (8 bytes) => 30 20 35 30 2e 30 20 30
11.415730 [D5] read [ 24]: (8 bytes) => 30 31 2e 38 20 30 31 33
11.431726 [D5] read [ 32]: (8 bytes) => 20 33 36 36 2e 32 20 2d
11.439720 [D5] read [ 40]: (8 bytes) => 2d 2d 2e 2d 20 30 38 32
11.455725 [D5] read [ 48]: (8 bytes) => 2e 31 20 2d 2d 2d 2e 2d
11.471725 [D5] read [ 56]: (8 bytes) => 20 30 32 30 2e 33 20 30
11.479731 [D5] read [ 64]: (8 bytes) => 31 30 30 30 30 30 30 30
11.487722 [D5] read [ 72]: (8 bytes) => 30 30 31 0d 00 00 00 00
11.487729 [D3] read: (229.1 50.0 229.0 50.0 001.8 013 366.2 ---.- 082.1 ---.- 020.3 010000000001
11.487737 [D5] update_status: OL
11.487742 [D5] update_status: !LB
11.487748 [D5] update_status: !CAL
11.487751 [D5] update_status: !FSD
11.487760 [D5] send_to_all: SETINFO driver.state "quiet"
13.319884 [D5] send_to_all: SETINFO driver.state "updateinfo"
13.319910 [D1] upsdrv_updateinfo...
13.319915 [D1] Quick update...
13.320177 [D3] send: QGS
13.383745 [D5] read [ 0]: (8 bytes) => 28 32 32 38 2e 38 20 35
13.399728 [D5] read [ 8]: (8 bytes) => 30 2e 30 20 32 32 38 2e
13.431741 [D5] read [ 16]: (8 bytes) => 38 20 35 30 2e 30 20 30
13.447733 [D5] read [ 24]: (8 bytes) => 30 31 2e 38 20 30 31 33
13.463724 [D5] read [ 32]: (8 bytes) => 20 33 36 35 2e 34 20 2d
13.471724 [D5] read [ 40]: (8 bytes) => 2d 2d 2e 2d 20 30 38 32
13.487730 [D5] read [ 48]: (8 bytes) => 2e 31 20 2d 2d 2d 2e 2d
13.503729 [D5] read [ 56]: (8 bytes) => 20 30 32 30 2e 33 20 30
13.511724 [D5] read [ 64]: (8 bytes) => 31 30 30 30 30 30 30 30
13.519743 [D5] read [ 72]: (8 bytes) => 30 30 31 0d 00 00 00 00
13.519750 [D3] read: (228.8 50.0 228.8 50.0 001.8 013 365.4 ---.- 082.1 ---.- 020.3 010000000001
13.519758 [D5] update_status: OL
13.519763 [D5] update_status: !LB
13.519767 [D5] update_status: !CAL
13.519770 [D5] update_status: !FSD
13.519779 [D5] send_to_all: SETINFO driver.state "quiet"
15.321696 [D5] send_to_all: SETINFO driver.state "updateinfo"
15.321715 [D1] upsdrv_updateinfo...
15.321720 [D1] Quick update...
15.321976 [D3] send: QGS
15.367761 [D5] read [ 0]: (8 bytes) => 28 32 32 38 2e 38 20 35
15.383739 [D5] read [ 8]: (8 bytes) => 30 2e 30 20 32 32 38 2e
15.399741 [D5] read [ 16]: (8 bytes) => 37 20 35 30 2e 30 20 30
15.407735 [D5] read [ 24]: (8 bytes) => 30 31 2e 38 20 30 31 33
15.431747 [D5] read [ 32]: (8 bytes) => 20 33 36 34 2e 36 20 2d
15.439737 [D5] read [ 40]: (8 bytes) => 2d 2d 2e 2d 20 30 38 32
15.455745 [D5] read [ 48]: (8 bytes) => 2e 31 20 2d 2d 2d 2e 2d
15.471740 [D5] read [ 56]: (8 bytes) => 20 30 32 30 2e 35 20 30
15.479738 [D5] read [ 64]: (8 bytes) => 31 30 30 30 30 30 30 30
15.487746 [D5] read [ 72]: (8 bytes) => 30 30 31 0d 00 00 00 00
15.487760 [D3] read: (228.8 50.0 228.7 50.0 001.8 013 364.6 ---.- 082.1 ---.- 020.5 010000000001
15.487768 [D5] update_status: OL
15.487773 [D5] update_status: !LB
15.487778 [D5] update_status: !CAL
15.487782 [D5] update_status: !FSD
15.487791 [D5] send_to_all: SETINFO driver.state "quiet"
17.322549 [D5] send_to_all: SETINFO driver.state "updateinfo"
17.322566 [D1] upsdrv_updateinfo...
17.322572 [D1] Quick update...
17.322843 [D3] send: QGS
17.367751 [D5] read [ 0]: (8 bytes) => 28 32 32 37 2e 36 20 35
17.383743 [D5] read [ 8]: (8 bytes) => 30 2e 30 20 32 32 38 2e
17.399741 [D5] read [ 16]: (8 bytes) => 30 20 35 30 2e 30 20 30
17.415742 [D5] read [ 24]: (8 bytes) => 30 31 2e 37 20 30 31 33
17.431754 [D5] read [ 32]: (8 bytes) => 20 33 36 35 2e 38 20 2d
17.439742 [D5] read [ 40]: (8 bytes) => 2d 2d 2e 2d 20 30 38 32
17.455745 [D5] read [ 48]: (8 bytes) => 2e 31 20 2d 2d 2d 2e 2d
17.471741 [D5] read [ 56]: (8 bytes) => 20 30 32 30 2e 35 20 30
17.479741 [D5] read [ 64]: (8 bytes) => 31 30 30 30 30 30 30 30
17.487748 [D5] read [ 72]: (8 bytes) => 30 30 31 0d 00 00 00 00
17.487755 [D3] read: (227.6 50.0 228.0 50.0 001.7 013 365.8 ---.- 082.1 ---.- 020.5 010000000001
17.487763 [D5] update_status: OL
17.487768 [D5] update_status: !LB
17.487774 [D5] update_status: !CAL
17.487777 [D5] update_status: !FSD
17.487787 [D5] send_to_all: SETINFO driver.state "quiet"
19.324397 [D5] send_to_all: SETINFO driver.state "updateinfo"
19.324420 [D1] upsdrv_updateinfo...
19.324425 [D1] Quick update...
19.324680 [D3] send: QGS
19.391757 [D5] read [ 0]: (8 bytes) => 28 32 32 39 2e 32 20 35
19.415750 [D5] read [ 8]: (8 bytes) => 30 2e 30 20 32 32 39 2e
19.431755 [D5] read [ 16]: (8 bytes) => 30 20 35 30 2e 30 20 30
19.447752 [D5] read [ 24]: (8 bytes) => 30 31 2e 38 20 30 31 33
19.463749 [D5] read [ 32]: (8 bytes) => 20 33 36 35 2e 31 20 2d
19.479751 [D5] read [ 40]: (8 bytes) => 2d 2d 2e 2d 20 30 38 32
19.487749 [D5] read [ 48]: (8 bytes) => 2e 31 20 2d 2d 2d 2e 2d
19.511764 [D5] read [ 56]: (8 bytes) => 20 30 32 30 2e 35 20 30
19.519750 [D5] read [ 64]: (8 bytes) => 31 30 30 30 30 30 30 30
19.527752 [D5] read [ 72]: (8 bytes) => 30 30 31 0d 00 00 00 00
19.527759 [D3] read: (229.2 50.0 229.0 50.0 001.8 013 365.1 ---.- 082.1 ---.- 020.5 010000000001
19.527768 [D5] update_status: OL
19.527784 [D5] update_status: !LB
19.527788 [D5] update_status: !CAL
19.527792 [D5] update_status: !FSD
19.527801 [D5] send_to_all: SETINFO driver.state "quiet"
21.326211 [D5] send_to_all: SETINFO driver.state "updateinfo"
21.326234 [D1] upsdrv_updateinfo...
21.326240 [D1] Quick update...
21.326498 [D3] send: QGS
21.391790 [D5] read [ 0]: (8 bytes) => 28 32 32 39 2e 31 20 35
21.399764 [D5] read [ 8]: (8 bytes) => 30 2e 30 20 32 32 39 2e
21.423778 [D5] read [ 16]: (8 bytes) => 31 20 35 30 2e 30 20 30
21.431767 [D5] read [ 24]: (8 bytes) => 30 31 2e 38 20 30 31 34
21.447770 [D5] read [ 32]: (8 bytes) => 20 33 36 35 2e 35 20 2d
21.463770 [D5] read [ 40]: (8 bytes) => 2d 2d 2e 2d 20 30 38 32
21.471781 [D5] read [ 48]: (8 bytes) => 2e 30 20 2d 2d 2d 2e 2d
21.487768 [D5] read [ 56]: (8 bytes) => 20 30 32 30 2e 35 20 30
21.495767 [D5] read [ 64]: (8 bytes) => 31 30 30 30 30 30 30 30
21.503764 [D5] read [ 72]: (8 bytes) => 30 30 31 0d 00 00 00 00
21.503771 [D3] read: (229.1 50.0 229.1 50.0 001.8 014 365.5 ---.- 082.0 ---.- 020.5 010000000001
21.503779 [D5] update_status: OL
21.503782 [D5] update_status: !LB
21.503786 [D5] update_status: !CAL
21.503790 [D5] update_status: !FSD
21.503799 [D5] send_to_all: SETINFO driver.state "quiet"
