PiFire
PiFire copied to clipboard
nebhead
PiFire is a Smart WiFi enabled controller for your pellet smoker / grill.
I think it would be nice to allow for notification using a piezo buzzer connected to the raspberry PI. It would make it more easier for delegates, that don't want...
OS is big and bulky. Pathlib does everything we want but faster and better I have a branch with this work but it'll be next week before I can test...
This was described in a [comment](https://github.com/nebhead/PiFire/issues/149#issuecomment-1435932324) on #149, and I thought it would be a good idea to add it here so it's not forgotten: Basically the idea is use...
**Describe the bug** In-place upgrade from 1.7.0-dev54 to 1.8.0-dev11 (in development branch) fails to load the grill platform module. `ERROR: An error occurred loading the [pifire_pwm] platform module.` **To Reproduce**...
**Describe the bug** Control script does not start properly on current version of PiFire dev branch (v1.8.0-dev11) with my configuration. Traceback shows from `grill_platform.get_input_status()` in `grillplat/raspberry_pi_all.py`. Snippet from `control.err.log`: ```...
During startup, the current code in `control.py` calls `dist_device.get_level()` (https://github.com/nebhead/PiFire/blob/df50620f3abca0978e5f35cd103ac85fca090c2f/control.py#L214) without setting `override=True`. This often means the initial reported pellet level will be reported as 100% until the next pellet...
On the Pellet-Manager it displays a user over a tonne of Pellets. I have a feed Rate of 0.9g/s maybe it calculate it wrong. Then Prime ist on 20grams and...
Relay issue with v1.8.0 using pi zero 2W - on v2.00a PCB. Active low relay option does not appear to work **To Reproduce** Steps to reproduce the behavior: Run wizard,...
The Oklahoma Joe DXL1200 Rider has an easy pellet drain into a bucket feature to help keep the auger tube clear which prevent pellets from swelling in high humidity. To...
I'm able to see sensors but no data. All entities read "unavailable" at all times. Not sure if this is on the PiFire side or home assistant but figured I...
