MissionControl icon indicating copy to clipboard operation
MissionControl copied to clipboard

Motion controls not working for MotionPlus Wiimote

Open fotiDim opened this issue 3 years ago • 2 comments

Switch Firmware Version

14.1.1 (Latest)

Atmosphère Version

1.3.2 (Latest)

Mission Control Version

0.7.0 (Latest)

Boot Method

Fusée

Issue Description

I tried playing Splatoon 2 with a Wiimote that has Motion Plus integrated. I was not able to control motion. Is that supposed to work? At the same time a Dualsense controller works fine.

Error Report

No response

Additional Context

No response

fotiDim avatar Jun 06 '22 12:06 fotiDim

There are some issues with the motion plus/extension detection that I wasn't able to debug properly without access to the controllers. Sometimes it fails to detect the correct state. Usually reconnecting a couple of times should be enough for it to get detected correctly. You should also connect the controller from face down on a flat surface in order for the motion controls to be calibrated correctly.

ndeadly avatar Jun 06 '22 14:06 ndeadly

I found a workaround to make motion controls start working. If I unplug the nunchuck then they do start to work.

However calibration seems to be so off that it casts the game unplayable. I tried powering on the wiimote either face down or face up but neither helped.

fotiDim avatar Jun 07 '22 07:06 fotiDim