won't flash

Open Canada-Fred opened this issue 7 years ago • 1 comments

Operating System: win 8 all FW off
Python Version: last .exe (downloaded 05.08.18)
Sonoff model: basic

2018-04-29 00:15:51,603: DEBUG: Current IPs: ['10.91.50.116', '192.168.48.11', '192.168.48.1'] 2018-04-29 00:17:05,632: INFO: Using the following configuration: 2018-04-29 00:17:05,632: INFO: Server IP Address: 192.168.43.32 2018-04-29 00:17:05,632: INFO: WiFi SSID: coyoteg6 2018-04-29 00:17:05,632: INFO: WiFi Password: ************ 2018-04-29 00:17:05,632: INFO: Platform: win32 2018-04-29 00:17:05,694: INFO: ** Now connect via WiFi to your Sonoff device. 2018-04-29 00:17:05,694: INFO: ** Please change into the ITEAD WiFi network (ITEAD-100001XXXX). The default password is 12345678. 2018-04-29 00:17:05,694: INFO: To reset the Sonoff to defaults, press the button for 7 seconds and the light will start flashing rapidly. 2018-04-29 00:17:05,710: INFO: ** This application should be kept running and will wait until connected to the Sonoff... 2018-04-29 00:19:01,239: DEBUG: Current IPs: ['192.168.48.11', '192.168.48.1'] 2018-04-29 00:19:09,694: DEBUG: Current IPs: ['10.10.7.2', '192.168.48.11', '192.168.48.1'] 2018-04-29 00:19:09,725: DEBUG: ~~ Connection attempt 2018-04-29 00:19:09,725: DEBUG: >> HTTP GET /10.10.7.1/device 2018-04-29 00:19:09,756: DEBUG: << { 2018-04-29 00:19:09,756: DEBUG: "deviceid": "10001b1fc1", 2018-04-29 00:19:09,756: DEBUG: "apikey": "0bc54303-477c-4b14-8dd1-4e78293c1979", 2018-04-29 00:19:09,756: DEBUG: "accept": "post" 2018-04-29 00:19:09,756: DEBUG: } 2018-04-29 00:19:09,756: DEBUG: >> HTTP POST /10.10.7.1/ap 2018-04-29 00:19:09,756: DEBUG: >> { 2018-04-29 00:19:09,756: DEBUG: "version": 4, 2018-04-29 00:19:09,756: DEBUG: "ssid": "coyoteg6", 2018-04-29 00:19:09,756: DEBUG: "password": "************", 2018-04-29 00:19:09,756: DEBUG: "serverName": " 192.168.43.32", 2018-04-29 00:19:09,756: DEBUG: "port": 8443 2018-04-29 00:19:09,756: DEBUG: }

and then the exe closed the window :(

May 08 '18 16:05 Canada-Fred

If you run in a cmd window, it should show all of the output. Please note that the latest version of the firmware will not work with SonOTA as per the home page.

May 17 '18 00:05 sillyfrog