W32Time
W32Time copied to clipboard
microsoft
This repo provides resources for high accuracy time on Windows
I've set up software timestamping on 10.0.19043 Build 19043, and set my registry values:  But all that shows up with w32tm /query /configuration under [TimeProviders] is NtpClient (Local) and...
On machines with multiple interfaces, we lack the ability to control on which interface the time service joins the multicast group. This occasionally leads to occasions where the time service...
I've setup a PTPd grandmaster on another system using the instructions, and conf file, from the "Windows Subsystem for Linux for testing Windows 10 PTP Client" techcommunity blog. My PtpClient...
after importing PTP section into register ; after opening the firewall ports; after restarting the w32tm & after executing resync it would return: ``` w32tm /resync Sending resync command to...
As the „Validation Guide - Software Timestamping.docx” mentions that the supported OS-es are Windows Server 2019 and Windows 10 (v1809) or later. But this is not actually accurate. As @Donis-...
I am running Windows 10 Enterprise 1809 and trying to sync to a ptp server. I am looking at the registry keys Computer\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\W32Time\TimeProviders and I am missing the PtpClients. Am...
The priority of the various possible time sources should be configurable. One should be able to configure a preference or priority of time sources, such that if PTP fails or...
Please describe the issue in 2-3 sentences. Include what you're trying to accomplish when the issue occurs. We have setup PTP as per: https://github.com/microsoft/W32Time/blob/master/Precision%20Time%20Protocol/docs/Validation%20Guide%20-%20Precision%20Time%20Protocol.docx And it's working fine. Now we...
When using linuxptp as master the SYNC message originTimestamp is filled with 0 since the standard allows it. Windows PTP client tries to sync but ends up with a very...
When following the guide for PTP setup in Windows 10 it seems that W32Time will only sync if PTP domain is 0. I used 2 setups, one is Trimble GM200...
