micron10

Hi i have small network for test and use static/dhcp/pppoe service i have 3 services 1mb , 3mb, 5,mb and have 2 network: 192.168.20.0/24 lan anf 192.178.21.0/24 pppoe my idea...

please if have time make a sample to see how to set ip and speed On Wed, Oct 2, 2019, 21:01 Quentin Monnet wrote: > So you would have to...

Thanks if i have questions i will write you. M На ср, 2.10.2019 г. в 21:23 ч. Quentin Monnet написа: > No sorry, I don't have time at the moment....

this is good idea. @DmitriyEshenko please check this , only may be need to add options to check for pppoe or ipoe packate and if not receive to remove vlan...

Hi i try this 1. add options work - need to add options to add range and all other options like : interface=eth0,mode=L3,start=UP,shared=1 interface=re:^eth1\.[0-9]+\.[0-9][0-9][0-9]$,mode=L2,shared=0,start=dhcpv4,mtu=1500,ifcfg=1 https://docs.accel-ppp.org/en/latest/configuration/ipoe.html 2. reload options remove interface...

Hi @xebd and @alakiza Is there any update on this new vlan_mon I have a problem with original vlan_mon the situation is i have 2 service one is main -...

ok and how to define lib path for second . to install on different lib dir На ср, 7.09.2022 г. в 17:52 ч. Sergey V. Lobanov ***@***.***> написа: > @micron10...

@svlobanov unfortunately you are wrong i make this test install in /usr/migrat/ and run second servise and is same i set in build options : -DBUILD_IPOE_DRIVER=FALSE -DBUILD_VLAN_MON_DRIVER=FALSE to disable vlan_mon...

commet this line and after run in debug.log show this (This is service without vlan-mon line in pppoe section): [2022-09-08 01:27:06.861] accel-ppp version 1.12.0 [2022-09-08 01:27:07.144] vlan-mon: vlan-name= vlan-timeout=60 [2022-09-08...

with original code after comment this line , all test is fine . Need to think for options to choice diable or enable . so there will be no need...