[BUG] Ethernet Adapter

[Ghostrider242]

Please confirm these before moving forward

• [x] I have searched for my issue and have not found a similiar in the Open or Closed issues.
• [x] I have tested that this issue has not been fixed in the latest (beta or stable) release.
• [x] I have checked the Discussions section for solutions.
• [x] This issue is about a bug (if it is not, please use the correct template).

Winhance Version

25.11.18

Windows version, edition, and architecture

Windows 11 IOT Enterprise LTSC 2024

Describe your issue

After the final reboot for the windows 11 Autounattend.xml the ethernet adapter remains disabled

Steps to reproduce the issue

Device Manager Under Network Adapters The network adapter is disabled

Expected behavior

I expected their would be a script in the autounattend.xml file to re-enable the adapter

Actual behavior

on trying to run Winhance I get a message saying there is no internet

Screenshots or Logs (if applicable)

Additional context

No response

[memstechtips]

Hey thanks for reporting this.

The autounattend.xml file does have an order to re-enable it as can be seen here:

I will have to test it on the specific ISO you used, where did you get it?

[Ghostrider242]

Hi Marco

Apologies for slow reply, I live in Ireland and you are in South Africa, I am replying in Irish time

I have a visual studio subscription from Microsoft where I get access to ISO's to use for development reasons.

I don't do as much developing any more but kept the subscription going

I can send you the ISO, How do you wish to receive it

Best Regards Flan Roberts

On Wed, 26 Nov 2025 at 19:32, Marco du Plessis @.***> wrote:

memstechtips left a comment (memstechtips/Winhance#244) https://github.com/memstechtips/Winhance/issues/244#issuecomment-3582924553

Hey thanks for reporting this.

The autounattend.xml file does have an order to re-enable it as can be seen here: image.png (view on web) https://github.com/user-attachments/assets/d870a42a-8977-46d7-8642-68d012853f27

I will have to test it on the specific ISO you used, where did you get it?

— Reply to this email directly, view it on GitHub https://github.com/memstechtips/Winhance/issues/244#issuecomment-3582924553, or unsubscribe https://github.com/notifications/unsubscribe-auth/BDMV37DFTKRMRHRQXV4PYMT36X53HAVCNFSM6AAAAACNIS66LWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZTKOBSHEZDINJVGM . You are receiving this because you authored the thread.Message ID: @.***>

[memstechtips]

@Ghostrider242

No problem at all.

Is it possible to upload it to your Google Drive (if you have one)?

[Ghostrider242]

Hi Marco

Please see link to ISO

https://drive.google.com/file/d/1-3jZlVxD6xOZ9zuYnAUJvcBTxRtzMwot/view?usp=sharing

Best Regards Flan

On Thu, 27 Nov 2025 at 14:20, Marco du Plessis @.***> wrote:

memstechtips left a comment (memstechtips/Winhance#244) https://github.com/memstechtips/Winhance/issues/244#issuecomment-3586118698

@Ghostrider242 https://github.com/Ghostrider242

No problem at all.

Is it possible to upload it to your Google Drive (if you have one)?

— Reply to this email directly, view it on GitHub https://github.com/memstechtips/Winhance/issues/244#issuecomment-3586118698, or unsubscribe https://github.com/notifications/unsubscribe-auth/BDMV37GE2P2HJCV3YG67433364CDBAVCNFSM6AAAAACNIS66LWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZTKOBWGEYTQNRZHA . You are receiving this because you were mentioned.Message ID: @.***>

[memstechtips]

Thanks, I will test this when I have some free time and get back to you.

[memstechtips]

@Ghostrider242

Thanks for reporting this, it will be fixed in the next update.

The issue was not related to IoT LTSC specifically, it was related to the script restarting the computer too soon after applying the UserCustomizations.

[Ghostrider242]

Hi Marco

Thanks for fixing the issue

In relation to adding a built in Autounattend xml editor to Winhance can a section be added to underneath where Software & Apss, Optimise and Customise are listed on the side bar

Just a suggestion, you may already have a different way planned

and then the options like hardware configurations and other options in the xml file that are currently not accessible by Winhance

Keep up the good work

Best Regards

Flan

On Thu, 4 Dec 2025 at 12:10, Marco du Plessis @.***> wrote:

memstechtips left a comment (memstechtips/Winhance#244) https://github.com/memstechtips/Winhance/issues/244#issuecomment-3611926765

@Ghostrider242 https://github.com/Ghostrider242

Thanks for reporting this, it will be fixed in the next update.

The issue was not related to IoT LTSC specifically, it was related to the script restarting the computer too soon after applying the UserCustomizations.

— Reply to this email directly, view it on GitHub https://github.com/memstechtips/Winhance/issues/244#issuecomment-3611926765, or unsubscribe https://github.com/notifications/unsubscribe-auth/BDMV37BWZDU4KZ6VMP3LH6L4AAQDDAVCNFSM6AAAAACNIS66LWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZTMMJRHEZDMNZWGU . You are receiving this because you were mentioned.Message ID: @.***>

[memstechtips]

No problem.

Yeah I will probably do it in a similiar way as to what you just described, but it will take some time :)

[Ghostrider242]

Hi

i understand it will take time

i sent the last screenshot without it been finished

I just added some of the options that could be added like Rufus does in to the right hand side with tick boxes for the different options

Some of these options I know are already in the xml file but just to show what could be added

On Thu, 4 Dec 2025 at 13:56, Marco du Plessis @.***> wrote:

memstechtips left a comment (memstechtips/Winhance#244) https://github.com/memstechtips/Winhance/issues/244#issuecomment-3612386729

No problem.

Yeah I will probably do it in a similiar way as to what you just described, but it will take some time :)

— Reply to this email directly, view it on GitHub https://github.com/memstechtips/Winhance/issues/244#issuecomment-3612386729, or unsubscribe https://github.com/notifications/unsubscribe-auth/BDMV37GRQNFKSYFMSI5GEND4AA4PPAVCNFSM6AAAAACNIS66LWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZTMMJSGM4DMNZSHE . You are receiving this because you were mentioned.Message ID: @.***>

[memstechtips]

@Ghostrider242

I still can't see the image, you might need to upload it to GitHub directly and not via email.

[Ghostrider242]

I have added the links in the Github page

On Thu, 4 Dec 2025 at 15:22, Marco du Plessis @.***> wrote:

memstechtips left a comment (memstechtips/Winhance#244) https://github.com/memstechtips/Winhance/issues/244#issuecomment-3612774051

@Ghostrider242 https://github.com/Ghostrider242

I still can't see the image, you might need to upload it to GitHub directly and not via email.

— Reply to this email directly, view it on GitHub https://github.com/memstechtips/Winhance/issues/244#issuecomment-3612774051, or unsubscribe https://github.com/notifications/unsubscribe-auth/BDMV37GO7P4JGI3HDKGIN7D4ABGUBAVCNFSM6AAAAACNIS66LWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZTMMJSG43TIMBVGE . You are receiving this because you were mentioned.Message ID: @.***>

[memstechtips]

I'm unable to get the image from that Google Drive link.

What you should do: Visit GitHub from a computer, copy the image, paste it directly into the chat here, it will be uploaded to GitHub and displayed in chat here.

[Ghostrider242]

Try Now