rnode-flasher

rnode-flasher copied to clipboard

Web Flasher Error: "Selected device is not an RNode"

6

Flashing a wisblock 4631. First flash went fine. Had an issue with bluetooth connection post flash so I reset and tried again. Same error. Now, when trying to reflash, once...

gridbasedotnet

Should be similar to T114, but probably different pins connected to the Lora board please see https://github.com/gargomoma/fakeTec_pcb for details

kbondar80

I don't understand how to upload RNode-firmware to any RNode board... But this issue #17 worries me: [Unable to flash Meshstatics](https://github.com/liamcottle/rnode-flasher/issues/17) (I also ask to pay attention to my comment...

badrussians

Unable to flash Meshstatics

1

Hello, A while back I flash RNODE Version 1.74. I am now unable to flash Meshtatic back to the device fails to open Serial Port. Is there something to be...

FloatingLizard

Hello, I would like to test RNode with all its capabilities, since I’m not really satisfied with MeshXXX. I’d like to use existing hardware. This consists of a Seeed Studio...

robertbuss85-stack

Looking for support to flash my Lillygo T-Pager

1

hello i just go my devices (2 lillygo T-lora pager) and would like to flash them and join the network. any advice or recommendations? ex. selecting an other product that...

Nex2none

* Closes #10 * Currently only supported by the CE firmware Already used 8mb flash size, while CE firmware still has an open PR for it: https://github.com/liberatedsystems/RNode_Firmware_CE/pull/72

smurfy

support for the t watch s3 would be great

wwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwww2

When I try to put the firmware on macOS on a T-Echo the firmware can be uploaded completely but then closing of the serial port fails and the firmware is...

synalysis

T114

2

Needs a actual working firmware, it says its supposed which it isnt at all due to after the firmware is put on the board NOTHING works at all, blank screen,...

pb2888