level20peon

ok, but I can't get it to work at all. A _arecord -L_ outputs: ``` default:CARD=sndrpimbed snd_rpi_mbed, Default Audio Device sysdefault:CARD=sndrpimbed snd_rpi_mbed, Default Audio Device ``` So the codec seems...

I added the 3V3 and GND connections and I transfered the recordings to a PC to listen to them but there's nothing in those recordings, they just don't contain any...

I removed the crystal and followed your "main" guide (https://github.com/jasaw/bbPiCam/blob/master/README.md) for setting up the software and hardware. Even with the kernel and drivers you sent me I didn't get it...

I will report back when I get the new hardware. I have seen that driver, but it hasn't found its way into the raspbian repository so I think I am...

I am still waiting for the hardware, because this time I wanted to let someone else handle the soldering - just in case. In the meantime, the MEMS microphone arrived...

I received the new mbed codec and I am actually able to record from the microphone now. However, there is a lot of static noise making this not feasable as...

I am using the MAX9814 one, yes. I tried to limit the gain but it didn't help. After spending more than 100€ on 2 mbed codecs + MAX9814 + soldering...

All I could find about graphviz in the Huginn repository was pointing to a .env setting called `USE_GRAPHVIZ_DOT`. However, there's no explanation about graphviz nor any installation requirement for graphviz...

> To elaborate on the full solution: Perfect, thank you!

So the _const_ in _const override_ was added with **2.0.0**, so I guess the title is somewhat fuzzy on that regard. Anyhow, I forgot to include that I am using...