packet_forwarder
packet_forwarder copied to clipboard
kersing
Multi protocol packet forwarder supporting the TTN gateway-connector protocol.
Should this be here or on the multitech-installer repo? In order to ease the transition to TTN v3, we've updated endpoint software to use a JoinEUI of all zeros. This...
WiringPI is now deprecated and the official repository removed. Details at http://wiringpi.com/news/ . A community maintained mirror is available for now. The install script has been updated to use this...
Hi, My gateway (raspberry pi zero + rak831) seems to have issues with reconnections to the TTN bridge. At first, everything works perfectly well for weeks usually. ``` Aug 26...
This is just a copy of the build-pi.sh script, with some minimal changes: - Remove the WiringPi compilation - Do not install the python-rpi.gpio package - Set PLATFORM to "lorank"...
I was testing the Chirpstack network server with mp_pkt_fwd and with original lora packet forwarder. Here, we use AU915 frequencies. I checked that the original packet forwader (Lora-Net) does a...
Cloned repo and built with "build-pi.sh"-script yesterday. After replacing the repo for WiringPi which was offline, everything installed seemingly correctly. Process starts successfully, but only runs correctly for about 4...
When the gateway is not equipped with a GPS module and is configured with `fake_gps: true`, the time information is not added to the "DeviceTimeAns" MAC command specified in [LoRaWAN...
After a CTRL-C, the process is normally stopping. However, after termination of downstream thread, I get a seg fault. The forwarder has been compiled for an ARM Cortex-A5. ` ***...
Hi, as reported here: https://github.com/jpmeijers/ttn-resin-gateway-rpi/issues/10, i can not build a alpine docker image in case of qsort_r is not implemented in Alpine Linux. It seems that is the last point...
Just in case you'd like to add Kerlink wirnet temperature, here is some information: 
