Port autodetect doesnt work. only hikvision cams captured. IP list accepts only IP addresses without specifying ports and without ranges

[aivavia]

Port autodetection works only at 80 port. Other ports are not detectable by your scanner. When I use -p key as python3 run_ingram.py -i masscan_results.txt -o out -t 50 -p 80 81 8080 8081 8000 8001 8002 8003 8004 8005 8006 8007 8008 it scans every IP address with all marked ports. It takes much more time. IP list cant accept IP ranges or IP addresses with port specified (for example 0.0.0.0:1080) Please revert back masscan support, or make IP list with ports acceptable. one more thing: no screenshots for any dahua or any other cams except hikvision. The results.csv contains a lot of dahua and other cams, but only hikvision cams are captured. The results.csv doesn't contain dahua logins and passwords. Absolutely. Previous version was more functional and workable.

[jorhelp]

Thank you for your feedback and we will resolve the issue.

[aivavia]

Would you be so kind as to make an "old" branch with the previous version of Ingram while the new version is being fixed?

[Aha1976]

after the update, the problem with dahua was not solved

[aivavia]

Nothing is fixed still. Please upload the previous version in the other branch. We all beg you.