ebusd-esp
ebusd-esp copied to clipboard
john30
Firmware for ESP8266 allowing eBUS communication for ebusd (https://github.com/john30/ebusd)
Can i use tihs firmware with ESP32 to read my gas boiler ebus datas? Or i must to order an adapter for esp32?
My esp-ebus-adapter sometimes becomes unavailable and does not come up again. From other projects I know that the low-level IP stack of esp sometimes can make problems and requires a...
Greetings! First of all, thanks for your great work! This deserves great respect. I would like to assemble a gateway based on ESP32 but using a wired LAN connection, -...
hi , I flashed ebus-v3_d1mini.bin on esp8266 -12f , and setup wifi with no issue. But when I plug the esp into the adapter , esp does not connect to...
I use a [eBUS adapter 2](https://ebus.github.io/adapter/base.en) and try to connect it with a nodeMCU (because the D1 stopped working). Should the adapter3 FW work with the old boards? I tried...
Hi. I have a problem with NO-SGINAL... Sounvier Duval Thelia Condens Piec AS 25-A + EXACONTROL E 7 C. Adapter: eBUS Adapter 3 + Wemos D1 mini PRO (flashed by...
Hello John, I connected a DHT11 sensor to my ESP32. The sensor will not be found. I checkt the signals with the Oszilloskop. The SW is doing the Pulldown but...
Possible to use ebusd-esp as a bus monitor to log communications between other devices on the bus?
Hello, I would like to spy or monitor communications on an eBUS system. I was wondering if ebusd-esp can be used for that? It would be useful to see what...
Hi, I couldn't find license information in this repository. Would you mind adding a license file, similar to how it's done in the [ebusd repo](https://github.com/john30/ebusd)? This would be useful to...
Hi, I want to use the EBUSD v3 adapter together with a MQ5 gas sensor. The MQ5 module needs 5V. I see there's a J3 header proving GND + D7...
