flatbox
flatbox copied to clipboard
jfedor2
Low profile hitbox-layout fightstick
Not sure if this is a Steam Input issue or what, but I cannot get the triggers to "press down" no matter what settings I use. On Windows, switching to...
Don't have much experience with PCB design. I've been checking JLCPCB the past couple months, and a couple parts have been out of stock. Would it be possible to replace...
These switches can use the keycap with the cross-style form. This opens much more options to choose from, like [these](https://es.aliexpress.com/item/1005003327722072.html?spm=a2g0o.detail.1000014.3.71e3b5ba3mhtWH&gps-id=pcDetailBottomMoreOtherSeller&scm=1007.40050.266918.0&scm_id=1007.40050.266918.0&scm-url=1007.40050.266918.0&pvid=8e6ef45b-c3c9-4167-b235-4970c6424a87&_t=gps-id:pcDetailBottomMoreOtherSeller,scm-url:1007.40050.266918.0,pvid:8e6ef45b-c3c9-4167-b235-4970c6424a87,tpp_buckets:668%232846%238107%231934&pdp_ext_f=%257B%2522sku_id%2522%253A%252212000026795931939%2522%252C%2522sceneId%2522%253A%252230050%2522%257D&pdp_pi=-1%253B212.84%253B-1%253B-1%2540salePrice%253BMXN%253Brecommend-recommend): Which could help people without access to good quality 3d...
It's a little cheaper to source than the Brook PS4/PS3 board and more current, though would take some work on the PCB design
I'd love a variant of this that has the thumb button centered on the panel. This requires essentially adding some padding to the left side of the chassis. See for...
I've just seen this tiny Pico alternative https://www.aliexpress.com/item/1005003504006451.html which looks like it should be easy to design around and would allow for a much cheaper non-SMD RP2040 version of the...
Hi, im havinhg some troubles with the buttons. pla+ one week of use were enoght to break some petg is hard to put them (those little thingys that secure them...
After loading firmware onto the rev4 flatbox, it simply loops back to opening as RPI-RP2 rather than being detected as a controller. So to reproduce: 1. Connect rev4 via USB...
Just wondering if you'd do a noir style for the button layout? Or would changing the pcb be a hassle? Sorry if it's a silly question
How snug is the PCB inside the case? I would like to use your 1.1 design, but with an Arduino pro micro with USB C. This one is 1 mm...
